Klingen kan ikke fjernes, installeres eller klemmes

Klingelåsen vil ikke engagere, klemmeskrue screw vil ikke løsnes eller strammes, eller klingen og skiver kan ikke samles sikkert.

• Blade lock is not aligned with the spindle
• Wrong direction used on the right-hand screw
• Sawdust packed around clamp washer or spindle
• Spindle lock or threads are damaged internally

1. The correct blade and washers clamp securely with the supplied wrench.

1. Remove the battery before touching any blade hardware.
2. Press the blade lock while turning the spindle by hand until the lock engages.
3. - Turn the screw counterclockwise to loosen and clockwise to tighten - clean clamp surfaces dry.
4. If the lock, threads, screw, or washers will not secure the blade, stop and seek service.

Dette er en forhåndsvisning af fejlfindingvejledningen, der er inkluderet i den fulde reparationsmanual.

• FM-08: Fm Dcs575 08

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

Offentlige sider viser kun en forhåndsvisning. Køb den fulde manual for at downloade komplette reparationstrin, diagrammer og verifikationsprocedurer.