FM-19: VÆGMONTERET OPLADER SKIFTER ELLER LØSRIVES MED INTKTE SPOR

FM-19 VÆGMONTERET OPLADER SKIFTER ELLER LØSRIVES MED INTKTE SPOR

• Screw heads do not engage the keyhole slots
• Screw exposure or spacing is incorrect
• Fasteners are not secured in sound wall material
• Cord strain or pack handling pulls the charger
• Mount is too close to a corner or airflow obstruction

1. The sound charger remains fully engaged and stable during a gentle battery cycle with clear airflow, or it is kept in safe tabletop service.

1. Verify sound supporting material and install appropriate screws to the current official head, engagement, spacing, and exposure requirements.
2. Remount within cord reach and away from corners, heat, and airflow obstructions, with no cord strain.
3. Perform an unloaded hand stability check and then a gentle battery insert/remove test; if the charger moves, return it to tabletop use or obtain qualified installation.
4. Remove the battery, unplug the charger, and take it off the wall; use it on a hard tabletop until the mount is proven secure.
5. Inspect both keyhole slots and the surrounding housing; use FM-18 if any slot or plastic is cracked, enlarged, or broken.

Dette er en forhåndsvisning af fejlfindingvejledningen, der er inkluderet i den fulde reparationsmanual.

• Opladeren gynger, glider, løfter sig fra screws eller trækker sig væk under indsættelse eller fjernelse af battery, selvom både bageste nøglehulsspor og huset er synligt intakte.

  Opladeren vipper, glider, løfter sig fra screws, eller trækker Fjern battery, træk opladeren ud, og tag den ned fra væggen; brug den på

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

Offentlige sider viser kun en forhåndsvisning. Køb den fulde manual for at downloade komplette reparationstrin, diagrammer og verifikationsprocedurer.