FM-04: SAVEN STARTER NÅR BATTERY INDSÆTTES ELLER VIL IKKE STOPPE

Savklingen starter med det samme når battery indsættes, eller saven vil ikke stoppe når udløseren slippes. Dette er en kritisk sikkerhedsrisiko der kræver øjeblikkelig opmærksomhed.

• Trigger or lock-off is jammed by debris
• Trigger return spring or switch has failed
• Control or wiring is shorted
• Trigger has been taped, tied, or modified
• Impact damage has distorted the handle or controls

1. Battery insertion causes no start, the saw starts only by deliberate control input, and trigger release de-energizes it every time.

1. Do not retest by holding, taping, or bypassing the lock-off or trigger; clean only loose dry debris around the external controls.
2. With the battery removed, verify the trigger and lock-off return freely and the handle is not cracked or distorted; any sticking confirms stop-use.
3. Have the switch, return mechanism, wiring, and control repaired by an authorized service provider, and return the saw only after a controlled function test.
4. Keep the blade clear, release the trigger, and remove the battery immediately when it is safe; do not set the saw down with a moving blade.

Dette er en forhåndsvisning af fejlfindingvejledningen, der er inkluderet i den fulde reparationsmanual.

• Klingen starter under battery indsættelse, udløseren sidder fast, eller frigivelse af udløseren deaktiverer ikke saven.

  Klingen starter under indsættelse af battery, aftrækkeren sidder fast,

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

Offentlige sider viser kun en forhåndsvisning. Køb den fulde manual for at downloade komplette reparationstrin, diagrammer og verifikationsprocedurer.