FM-24: AUTOMATISK SPINDELLÅS HOLDER IKKE BOREPATRONEN

FM-24

• Spindle has not reached the lock position
• Gear train is between teeth and needs slight hand rotation
• Spindle-lock or gearbox component is worn or broken
• Chuck body is loose on the spindle

1. The spindle lock holds the empty chuck for normal hand tightening and loosening, or the lock fault is proven.

1. Inspect for a loose chuck body, unusual free play, or grinding while keeping the tool unpowered.
2. If the spindle never locks or the chuck body is loose, route the chuck, spindle lock, gearbox, or spindle to service.
3. Remove the battery and test the spindle lock only with an empty chuck.
4. Turn the chuck gently through a small angle, then retry the sleeve so the internal lock can engage.

Dette er en forhåndsvisning af fejlfindingvejledningen, der er inkluderet i den fulde reparationsmanual.

• Med battery fjernet og borepatronen tom, roterer drejeskiven spindlen og motor frit i stedet for at give nok lås til at stramme eller løsne borepatronen med hånden.

  Med battery fjernet og borepatronen tom, drejer hylsteret spindlen og battery frit i stedet for at give 1. Fjern battery og test kun spindellåsen med en tom borepatron.

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

Offentlige sider viser kun en forhåndsvisning. Køb den fulde manual for at downloade komplette reparationstrin, diagrammer og verifikationsprocedurer.