البحث في أدلة الإصلاح
اعثر على أدلة الإصلاح والأدلة والأعراض ورموز الأخطاء في قاعدة المعرفة.
A known-good compatible charger begins its normal charging cycle, but the cycle repeatedly stops, restarts, faults, or continues abnormally without reaching completion.
The trigger binds, the drill continues after release, or speed does not follow trigger pressure safely.
LED الأخضر للشاحن لا يومض، لا يصبح ثابتًا أبدًا، أو battery يبقى غير مشحون.
The chain is hard to pull around the bar, the bar becomes unusually hot, or smoke appears without an electrical odor.
الشاحن يتأرجح، ينزلق، يرفع عن screws، أو يُسحب أثناء إدخال أو إزالة battery رغم أن فتحات المفتاح الخلفية والغلاف مرئية سليمة.
The housing, handle, rails, nose, vents, lens, or accessory mount is cracked or loose.
A hand-tightened bit slips, visibly wobbles, or its tip runs off center when the drill turns.
Smoke, flame, severe arcing, liquid, battery damage, melted contacts, exposed parts, or cracked structure.
Spoušť se plně nevrací ven, nebo motor/kotouč běží i po uvolnění spouště.
The bit passed initial insertion, but backs out, falls free, or loses drive while the chuck body stays secure.
The chuck still rotates, but a new mechanical grind, knock, scrape, tight spot, or severe vibration remains with the bit removed and is not ordinary motor or brake sound.
The forward/reverse button sticks, commands the wrong rotation, or center does not lock the trigger.
The tool or pack becomes unusually hot, or operation stops only after heat builds.
arcs متكررة ساطعة أو طقطقة حادة مرئية عند فتحات التهوية الخلفية أثناء تشغيل الأداة.
CORDON D’ALIMENTATION OU PRISE ENDOMMAGÉE, LÂCHE, BRÛLÉE, OU CHAUDE
The tool starts and runs at no load, but stops abruptly on an ordinary fastener with no jam or twist.
A tool-free knob is frozen, cross-threaded, spins without effect, will not clamp the bar, or cannot hold the set tension.
The tool works until the pack, handle, or tool is bumped or shifted, then loses power.
Smoke, burning odor, melting, liquid, active sparks, swelling, hissing, or severe pack damage is present.
The bar is bent or cracked, chain links or cutters are broken, or the guide-bar scabbard is split, missing, or will not stay on.
fm-3-5: CHARGING STARTS, THEN STOPS OR NEVER REACHES NORMAL COMPLETION
FM-16: FM-16: خطر فوري BATTERY، كهربائي، خرج، أو هيكلي
FM-19: الشاحن المثبت على الحائط يتحرك أو ينفصل مع فتحات سليمة
FM-09: FM-09 A ريشة مثبتة تنزلق، تهتز، أو تخرج عند عدم التحميل
FM-27: FM-27 الأداة أو الحزمة ترتفع حرارتها، أو يتكرر إيقاف التشغيل بسبب الحرارة
FM-17: FM-17 THE BIT SLIPS OR PULLS OUT UNDER LOAD
FM-31: FM-31 القدم منحني، متشقق، مرتخي، أو لا يجلس مستويًا
FM-32: FM-32 استخراج الغبار ضعيف أو مسار الغبار مسدود
FM-27: الأداة تصدر طحن، طرق، ربط، أو اهتزاز شديد جديد
FM-28: يظهر تقوس أو طقطقة ثقيلة BRUSH عند فتحات التهوية الخلفية