البحث في أدلة الإصلاح

اعثر على أدلة الإصلاح والأدلة والأعراض ورموز الأخطاء في قاعدة المعرفة.

الأدلة

الأعراض

Gói được chèn đầy đủ nhưng một hoặc cả hai tab nhả bên không giữ được, hoặc gói có thể bị kéo ra mà không cần nhấn cả hai tab.
The battery latches normally and works while still, but charging or tool power stops, restarts, or flickers when the pack or receiver is gently moved.
The bit inserts, but the collar does not return or a firm tug pulls the bit out.
A straight bit or socket visibly orbits, shakes, or runs off-center during a brief no-load test.
Chłodna wiertarka zaczyna działać, a następnie zatrzymuje się podczas krótkiego testu bez obciążenia lub lekkiej pracy.
Efter att avtryckaren släppts fortsätter bladet att slå märkbart längre än normalt.
The guide bar steers sideways in the cut or the kerf curves even though the workpiece is supported and the saw is held square.
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
Kerah menarik tetapi aksesori yang terpasang tidak keluar, atau potongan patah terjebak di chuck.
Den löpande sågen hoppar, vibrerar mot arbetsstycket, fastnar eller sparkar bakåt eller åt sidan.
The trigger binds, the drill continues after release, or speed does not follow trigger pressure safely.
Bezpieczne proste wiertło i czysta praca nie eliminują głośnego dźwięku lub drgań bez obciążenia.
The drive operates normally, but the work light stays dark, flickers, or cuts in and out with trigger use.
The reservoir contains oil but the chain stays dry, the primer gives no visible result, or the bar oil path remains dry.
The accessory catches or stops in the material and the tool reacts sharply in the hand.
NO WORKLIGHT OR MOTOR RESPONSE
The direction button jams, will not hold center lock, or the tool runs in only one direction.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
Bladet håller inte fastspänt
TRIGGER STICKS, WILL NOT RETURN, OR MOTOR KEEPS RUNNING

أوضاع الأعطال