البحث في أدلة الإصلاح
اعثر على أدلة الإصلاح والأدلة والأعراض ورموز الأخطاء في قاعدة المعرفة.
The trigger binds, the drill continues after release, or speed does not follow trigger pressure safely.
Kerah menarik tetapi aksesori yang terpasang tidak keluar, atau potongan patah terjebak di chuck.
The direction selector is centered, but the trigger still depresses enough to start the motor or the center position cannot reliably prevent activation.
battery بدرجة حرارة الغرفة مثبت في شاحن متوافق مهوي يصبح أكثر سخونة بشكل ملحوظ من battery المعروف الجيد المماثل أثناء شحن ثابت عادي، بدون دخان أو تورم أو ذوبان.
Bezpieczne proste wiertło i czysta praca nie eliminują głośnego dźwięku lub drgań bez obciążenia.
Den löpande sågen hoppar, vibrerar mot arbetsstycket, fastnar eller sparkar bakåt eller åt sidan.
The reservoir contains oil but the chain stays dry, the primer gives no visible result, or the bar oil path remains dry.
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
The drive operates normally, but the work light stays dark, flickers, or cuts in and out with trigger use.
The battery latches normally and works while still, but charging or tool power stops, restarts, or flickers when the pack or receiver is gently moved.
The bit inserts, but the collar does not return or a firm tug pulls the bit out.
A straight bit or socket visibly orbits, shakes, or runs off-center during a brief no-load test.
Efter att avtryckaren släppts fortsätter bladet att slå märkbart längre än normalt.
Chłodna wiertarka zaczyna działać, a następnie zatrzymuje się podczas krótkiego testu bez obciążenia lub lekkiej pracy.
The accessory catches or stops in the material and the tool reacts sharply in the hand.
NO WORKLIGHT OR MOTOR RESPONSE
The direction button jams, will not hold center lock, or the tool runs in only one direction.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
Bladet håller inte fastspänt
TRIGGER STICKS, WILL NOT RETURN, OR MOTOR KEEPS RUNNING
FM-05: FM-05 الزناد يعلق، يعمل باستمرار، أو استجابة السرعة غير آمنة
FM-12: FM-12 المنشار يقفز، يهتز، أو يركل أثناء القطع
FM-13: FM-13 ضوء LED لا يضيء أو يومض
FM-14: FM-14 المثقاب يطحن أو يهتز بدون حمل
FM-16: FM-16 زيت اليد لا يوزع الزيت على الشريط والسلسلة
FM-17: FM-17 BATTERY يصبح ساخنًا بشكل غير عادي أثناء شحن عادي
fm-2-1-3: FM-14 CHUCK COLLAR WILL NOT PULL OR RETURN
FM-13: FM-13 WORKLIGHT IS DEAD, DIM, OR INTERMITTENT WHILE THE MOTOR RUNS
fm-3-1-2: FM-12 انقطاع الطاقة أو الشحن فقط عند تحريك BATTERY أو المستقبل
FM-09: FM-09 الاهتزاز في البت، المقبس، أو مخرج الإخراج
FM-04: FM-04 المثقاب يتوقف أثناء البرودة
FM-14: FM-14 المنشار يقطع بشكل منحرف أو ينحرف إلى جانب واحد
FM-31: FM-31 القدم منحني، متشقق، مرتخي، أو لا يجلس مستويًا
FM-13: FM-13 الفرامل الكهربائية لا توقف الشفرة بسرعة
FM-05: ينطفئ المنشار أو يقطع ويتوقف تحت الحمل
FM-01: FM-01 NO WORKLIGHT OR MOTOR RESPONSE
fm-2-1-2: FM-06 DIRECTION CONTROL JAMS, WILL NOT LOCK OFF, OR LOSES ONE DIRECTION
FM-06: يعمل MOTOR لكن الشفرة لا تدور
FM-10: القطع غير مربع أو زاوية الميل غير دقيقة
fm-2-1-4: FM-22 BIT BINDS, TOOL STALLS, TWISTS, OR STOPS IN THE WORK