搜索维修指南

在知识库中查找维修指南、手册、症状和错误代码。

手册

症状

La hoja funciona descentrada, toca el protector o la zapata, produce vibración inusual o hace un ruido de molienda.
La hoja vibra o rechina
At room temperature, the battery is fully seated in a powered known-good compatible charger, yet the charger never enters its normal charging state.
Spust zacina się, nie wraca, uruchamia się nieprzewidywalnie lub prędkość bez obciążenia skacze.
Narzędzie, akumulator lub ładowarka nagrzewa się nadmiernie lub ochrona wielokrotnie zatrzymuje pracę.
Bright repeated arcing or sharp crackling is visible at the rear vents while the tool runs.
The forward/reverse button sticks, commands the wrong rotation, or center does not lock the trigger.
Obecne są dym, płomień, łuk elektryczny, ciecz, uszkodzony przewód, uszkodzenie battery lub odsłonięta struktura.
The bar is bent or cracked, chain links or cutters are broken, or the guide-bar scabbard is split, missing, or will not stay on.
Tool or battery becomes abnormally hot, smells hot, or repeats heat shutdown after light use.
标准1/4英寸动力槽冲击批头无法插入、保持锁定或从六角夹持器释放。
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
The collar pulls, but the bit will not come out, or a short/broken piece is recessed in the chuck.
The accessory catches or stops in the material and the tool reacts sharply in the hand.
A hand-tightened bit slips, visibly wobbles, or its tip runs off center when the drill turns.
The release button moves poorly or the pack remains trapped on the tool rails.
The bit inserts, but the collar does not return or a firm tug pulls the bit out.
Kerah menarik tetapi aksesori yang terpasang tidak keluar, atau potongan patah terjebak di chuck.
The direction selector is centered, but the trigger still depresses enough to start the motor or the center position cannot reliably prevent activation.
方向选择器动作并保持正常卡位，但卡盘无法在某一方向运行或反向旋转。

故障模式