搜索维修指南

在知识库中查找维修指南、手册、症状和错误代码。

手册

症状

battery går inte att sätta i helt, klicka på plats, hålls kvar eller släpps normalt.
BATTERY SEATS BUT WILL NOT STAY LATCHED
A compatible V20 battery starts onto the tool rails but binds before reaching the normal seated and latched position.
O battery para antes da posição totalmente encaixada e o carregador não pode iniciar uma carga normal. Nenhuma rachadura visível no carregador, detritos condutivos ou pacote inchado foi confirmado até o momento.
Pemicu menyalakan area kerja, tetapi motor tetap diam dan landasan tidak bergerak.
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
The battery reaches the normal seated position, but the release latch does not retain it and the pack can slide away without pressing the release button.
The trigger lights the work area, but the motor stays silent and the quick-release chuck does not turn.
Bladet håller inte fastspänt
Med klämspaken fungerande går ett korrekt blad inte i helt eller klarar handdragstest.
Tombol maju/mundur tidak masuk, kunci tengah gagal, atau alat berjalan ke arah yang salah.
Pemicu macet, gagal kembali, atau motor tetap menyala setelah dilepaskan.
The direction button jams, will not hold center lock, or the tool runs in only one direction.
The accessory or fastener stops in the work and the tool stalls, twists, or cannot be withdrawn normally.
Kerah menarik tetapi aksesori yang terpasang tidak keluar, atau potongan patah terjebak di chuck.
The accessory catches or stops in the material and the tool reacts sharply in the hand.
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
Rotation and impact pulses are steady, but a normal fastener advances much more slowly than expected.
The accessory slips from the fastener, damages it, breaks it, or drives it beyond the intended seat.
The chuck still rotates, but a new mechanical grind, knock, scrape, tight spot, or severe vibration remains with the bit removed and is not ordinary motor or brake sound.

故障模式

part