搜索维修指南
在知识库中查找维修指南、手册、症状和错误代码。
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
After trigger release, the bit or square drive coasts noticeably longer than normal before stopping.
The motor can be heard, but the front output remains still in both directions with the bit removed.
The direction lever will not reach forward, reverse, or center lock, or the selected position does not hold.
Den löpande sågen hoppar, vibrerar mot arbetsstycket, fastnar eller sparkar bakåt eller åt sidan.
Battery 膨胀、泄漏、开裂、潮湿、烧焦或异常发热
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
Charger green LED stays on
The external structure is visibly cracked, loose, crushed, melted, or missing material even if the saw still runs.
360度除尘口卡住或松动，或兼容的软管/接头无法保持连接。
Bladet lämnar linjen, böjs överdrivet, böjs eller går av under en annars kontrollerad skärning.
Motor runs, chain does not
Chain moves but does not cut
Motosega morta con pacco carico
The bar is bent or cracked, chain links or cutters are broken, or the guide-bar scabbard is split, missing, or will not stay on.
The reservoir contains oil but the chain stays dry, the primer gives no visible result, or the bar oil path remains dry.
The saw cuts slowly, makes fine dust instead of chips, chatters in the kerf, or must be pushed hard despite judging sharpness.
Klemmen vil ikke bevege seg
Bladet håller inte fastspänt
Med klämspaken fungerande går ett korrekt blad inte i helt eller klarar handdragstest.
FM-02: FM-02 电池无法充电或充电器无法就绪
fm-p16-b-16f80f31: Sätt tillbaka en hel kedja på drivhjulet och i hela ledarfåran, montera ihop,
fm-p14-b-93c34c19: 边界：如果张紧控制无法转动或夹紧，
FM-05: 如果锯子在确认有电且控制自由的情况下仍无反应，保持机壳关闭，
FM-05: 锯在负载下关闭或断续切割
FM-31: FM-31 底座弯曲、开裂、松动或无法平放
FM-18: FM-18 油从盖子、油箱或机壳泄漏
FM-21: FM-21 导轨、锯链、护套或切割附件损坏
FM-22: FM-22 BATTERY 或充电器过热、膨胀、开裂、泄漏或冒烟
fm-p13-b-17e1d6d1: 锁止或触发卡滞，无法完全移动，启动
FM-30: FM-30 锯在斜切设为零度时切割不方正
FM-13: 锯或齿轮箱异常发热或有热味但无烟无火花
FM-05: Battery 无法充电或充电器显示延迟或故障状态
FM-20: FM-20 异常磨损、响声或剧烈振动
FM-14: FM-14 锯切歪斜或向一侧偏移
FM-16: FM-16 手动引油器不向导板和链条供油
FM-17: FM-17 导板或链条在木材中被夹住或卡住
FM-08: FM-08 安装的刀片无法释放
FM-15: FM-15 工具、BATTERY或充电器过热
FM-08: FM-08 链条松弛、下垂或无法保持张力