搜索维修指南
在知识库中查找维修指南、手册、症状和错误代码。
The tool starts and runs at no load, but stops abruptly on an ordinary fastener with no jam or twist.
锁定的袋口接口处有灰尘泄漏
A straight bit or the empty chuck shows repeatable side-to-side runout at low no-load speed after the bit has been centered and tightened correctly.
锁定0度斜切时，声音正常的刀片与底座不垂直。
底座可设定角度，但斜切杆锁定后仍移动或切割时漂移。
motor 和轴转动，但刀片在垫圈上卡滞或滑动，正常支撑切割时发生。
No-load operation is smooth, but the saw bounces, chatters, or vibrates as soon as cutting begins.
The blade pinches or stalls in the kerf, or the saw reacts backward during a cut.
With the blade clear of material, the saw sounds slow, hunts, or repeatedly rises and falls in speed.
The external structure is visibly cracked, loose, crushed, melted, or missing material even if the saw still runs.
360度除尘口卡住或松动，或兼容的软管/接头无法保持连接。
Spoušť se plně nevrací ven, nebo motor/kotouč běží i po uvolnění spouště.
安装了正确的battery，但按下锁定按钮时触发器无motor响应。
A suitable bag or vacuum collects little dust while the port remains secure and aimed.
The saw or pack smokes, leaks, sparks, melts, smells burned, swells, vents, or hisses.
The blade turns steadily, but wood cuts slowly, burns, or needs heavy feed pressure.
FM-25: FM-25 工具在负载下关闭，无机械卡滞
FM-25: 卡盘或钻头在空载时明显摆动
FM-25: Støv slipper ut ved den låste posen-til-port skjøten
FM-01: FM-01 工具完全无反应 - 无LED或MOTOR
FM-23: LA PUNTA SCIVOLA O SI STACCA DAL MANDRINO
FM-24: FM-24 下护罩无法及时关闭
fm-p17-b-2db8b3a0: 兼容的 battery 无法完全插入机壳或会卡住
fm-p17-b-80df6c98: Support the battery, press the release, and slide it forward only to the secondary
FM-03: FM-03 BATTERY无法滑入、就位或锁定
FM-33: FM-33 尘口无法旋转、保持位置或固定软管
FM-37: FM-37 外壳、手柄、BATTERY导轨或通风口开裂或损坏
FM-14: FM-14 轴锁无法啮合或保持
FM-34: FM-34 锯片卡住、停转或切割时反冲
FM-08: FM-08 空载速度弱、不均匀或波动
FM-06: FM-06 锁定装置不阻止触发器或未复位
FM-36: FM-36 锯仅在刀片接触工件时抖动或振动
FM-30: FM-30 锯在斜切设为零度时切割不方正
FM-27: 深度设定后无法保持固定
FM-23: 下护罩阻力大或无法完全移动
FM-04: battery 卡在锯内无法取出