搜索维修指南
在知识库中查找维修指南、手册、症状和错误代码。
The drill makes abnormal grinding or knocking, vibrates strongly, or the chuck and spindle have play.
触发器复位且motor停止，但LED持续点亮远超约20秒。
连接DCB115时分路断路器或GFCI跳闸，且无可见电线损坏、液体、烟雾、火花、燃烧气味、熔化或已识别导电杂物。
The pack starts and runs a known-good compatible tool at no load, but output stops promptly during an ordinary matched task that a known-good battery completes.
插入充电器时断路器或 GFCI 跳闸
Efter att avtryckaren släppts fortsätter bladet att slå märkbart längre än normalt.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
The saw cuts slowly, makes fine dust instead of chips, chatters in the kerf, or must be pushed hard despite judging sharpness.
Po usunięciu battery i bez zamontowanego wiertła uchwyt nie obraca się normalnie ręcznie lub wydaje się zacięty.
The drive operates normally, but the work light stays dark, flickers, or cuts in and out with trigger use.
Chain moves but does not cut
The external structure is visibly cracked, loose, crushed, melted, or missing material even if the saw still runs.
360度除尘口卡住或松动，或兼容的软管/接头无法保持连接。
Spoušť se plně nevrací ven, nebo motor/kotouč běží i po uvolnění spouště.
FM-13: FM-13 BATTERY 在无负载时运行工具，但负载时关闭
FM-13: FM-13 WORKLIGHT IS DEAD, DIM, OR INTERMITTENT WHILE THE MOTOR RUNS
FM-13: FM-13 钻机磨损、敲击、振动或主轴间隙
FM-13: 轴锁已啮合，但刀片定位销无法转动
FM-13: FM-13 LED不亮或闪烁
FM-13: FM-13 切割缓慢、粗糙或需过大压力
FM-13: FM-13 夹头或主轴静止时转动困难
FM-13: Fm-13 电动制动未能及时停止刀片
FM-13: 插入充电器时断路器或 GFCI 跳闸
FM-17: FM-17 导板或链条在木材中被夹住或卡住
FM-02: 电池组无法安装、锁定或释放
FM-21: FM-21 导轨、锯链、护套或切割附件损坏
FM-27: 深度设定后无法保持固定
FM-30: FM-30 锯在斜切设为零度时切割不方正
FM-35: FM-35 锯片平稳旋转但切割缓慢、烧焦或需用力
FM-06: FM-06 锁定装置不阻止触发器或未复位
FM-36: FM-36 锯仅在刀片接触工件时抖动或振动
FM-23: 下护罩阻力大或无法完全移动
FM-31: FM-31 底座弯曲、开裂、松动或无法平放
FM-32: FM-32 除尘效果弱或除尘通道堵塞