症状
浏览已记录的症状，并从搜索结果跳转到匹配的维修指南。
Bright repeated arcing or sharp crackling is visible at the rear vents while the tool runs.
0 份相关手册
查找指南 →
The drill sounds and rotates normally with no load, does not stall, overheat, slip, or vibrate abnormally, yet a corrected drilling or fastening task progresses much more slowly than expected.
0 份相关手册
查找指南 →
DCB115出現新嘅大聲電流嗡嗡聲或鬆動嘅零件響聲，之前冇。冇煙、火花、燒焦氣味、異常熱度、液體、可見外殼裂紋或充電中斷。
0 份相关手册
查找指南 →
The battery is cool and dry but the outer shell is cracked, split, punctured, missing a piece, or open at a seam, with no smoke, liquid, swelling, odor or dangerous heat.
0 份相关手册
查找指南 →
The trigger binds, the drill continues after release, or speed does not follow trigger pressure safely.
0 份相关手册
查找指南 →
The housing, handle, rails, nose, vents, lens, or accessory mount is cracked or loose.
0 份相关手册
查找指南 →
The lithium battery or charger shows abnormal heat, swelling, cracking, electrolyte, hissing, odor, sparks, or smoke.
0 份相关手册
查找指南 →
Smoke, burning odor, melting, liquid, active sparks, swelling, hissing, or severe pack damage is present.
0 份相关手册
查找指南 →
The cool dry battery shell appears closed, but a new loose rattle, clunk or shifting movement is heard inside after a drop or impact, with no swelling, liquid, smoke, odor or heat.
0 份相关手册
查找指南 →
Liquid entered the tool, the housing emits smoke or sparks, plastic melts, a burning odor appears, or wiring or contacts are exposed.
0 份相关手册
查找指南 →
The forward/reverse button sticks, commands the wrong rotation, or center does not lock the trigger.
0 份相关手册
查找指南 →
The front hand guard, front or rear handle, main housing, ribbed bumper, fastener, battery well, or another external part is cracked, loose, or missing.
0 份相关手册
查找指南 →
The pack is swollen, leaking or wet, smoking, sparking, melting, giving a strong burning or chemical odor, or dangerously hot during charging, use or storage.
0 份相关手册
查找指南 →
The blade pinches or stalls in the kerf, or the saw reacts backward during a cut.
0 份相关手册
查找指南 →
Smoke, sparks, liquid, swelling, leakage, burning odor, exposed parts, or cracked structure is present.
0 份相关手册
查找指南 →
The top selector sticks, will not stay in range, or low and high feel the same.
0 份相关手册
查找指南 →
The bit jams, the motor stalls, or the drill twists sharply in the hands during work.
0 份相关手册
查找指南 →
THE DRILL WILL NOT START WITH A CHARGED KNOWN-GOOD BATTERY
0 份相关手册
查找指南 →
The blade turns steadily, but wood cuts slowly, burns, or needs heavy feed pressure.
0 份相关手册
查找指南 →
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
0 份相关手册
查找指南 →