症状
浏览已记录的症状，并从搜索结果跳转到匹配的维修指南。
The accessory or fastener stops in the work and the tool stalls, twists, or cannot be withdrawn normally.
0 份相关手册
查找指南 →
Smoke, liquid, swelling, or major damage
0 份相关手册
查找指南 →
The chuck sleeve or jaws bind, fail to center, trap a bit, or cannot grip it.
0 份相关手册
查找指南 →
主軸鎖無法啟動，附送扳手無法轉動bolt，或鋸片bolt卡死、滑牙或交叉螺紋。
0 份相关手册
查找指南 →
The direction selector is centered, but the trigger still depresses enough to start the motor or the center position cannot reliably prevent activation.
0 份相关手册
查找指南 →
The charger housing becomes much hotter than normal charging warmth or operation repeatedly pauses as the charger heats, but there is no smoke, spark, burning odor, liquid, melting, swollen pack, or visible structural damage.
0 份相关手册
查找指南 →
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
0 份相关手册
查找指南 →
Charger green LED flashes
0 份相关手册
查找指南 →
The collar pulls but the installed accessory will not come out, or a broken piece is trapped in the chuck.
0 份相关手册
查找指南 →
The battery shows a credible high charge or has just completed a proven charge, remains fully latched and still gives no response in a known-good compatible tool while stationary.
0 份相关手册
查找指南 →
夾頭停止且移除battery後，頂部選擇器無法完全移入範圍1或範圍2，即使手動轉動夾頭對齊齒輪。
0 份相关手册
查找指南 →
連接DCB115時分路斷路器或GFCI跳閘，冇可見電線損壞、液體、煙霧、火花、燒焦氣味、熔化或導電碎屑。
0 份相关手册
查找指南 →
A bit that appears clamped slips in use or visibly wobbles in a no-load test.
0 份相关手册
查找指南 →
The battery latches normally and works while still, but charging or tool power stops, restarts, or flickers when the pack or receiver is gently moved.
0 份相关手册
查找指南 →
The bit inserts, but the collar does not return or a firm tug pulls the bit out.
0 份相关手册
查找指南 →
Charger green LED stays on
0 份相关手册
查找指南 →
A correct-looking bit will not enter fully or can be pulled out after the collar is released.
0 份相关手册
查找指南 →
A known-straight, fully retained 1/4-in. hex bit traces a visible circle at no load.
0 份相关手册
查找指南 →
The pack starts and runs a known-good compatible tool at no load, but output stops promptly during an ordinary matched task that a known-good battery completes.
0 份相关手册
查找指南 →
Direction button is centered
0 份相关手册
查找指南 →