搜索维修指南

在知识库中查找维修指南、手册、症状和错误代码。

手册

症状

Narzędzie, akumulator lub ładowarka nagrzewa się nadmiernie lub ochrona wielokrotnie zatrzymuje pracę.
El paquete está hinchado, goteando, siseando, humeando, quemándose, aplastado, mojado o abierto.
The forward/reverse button sticks, commands the wrong rotation, or center does not lock the trigger.
The collar pulls, but the bit will not come out, or a short/broken piece is recessed in the chuck.
Spust zacina się, nie wraca, uruchamia się nieprzewidywalnie lub prędkość bez obciążenia skacze.
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
A correct-looking bit will not enter fully or can be pulled out after the collar is released.
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
The bit rotates, but no impact pulses begin when a correct fastener provides normal resistance.
The bit passed initial insertion, but backs out, falls free, or loses drive while the chuck body stays secure.
The motor can be heard, but the front output remains still in both directions with the bit removed.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
Bright repeated arcing or sharp crackling is visible at the rear vents while the tool runs.
Obecne są dym, płomień, łuk elektryczny, ciecz, uszkodzony przewód, uszkodzenie battery lub odsłonięta struktura.
The bar is bent or cracked, chain links or cutters are broken, or the guide-bar scabbard is split, missing, or will not stay on.
Tool or battery becomes abnormally hot, smells hot, or repeats heat shutdown after light use.
標準1/4吋動力槽衝擊批頭唔能插入、鎖定或從六角座釋放。
The accessory catches or stops in the material and the tool reacts sharply in the hand.
A hand-tightened bit slips, visibly wobbles, or its tip runs off center when the drill turns.
The direction selector moves and holds normal detents, but the chuck fails to run in one direction or rotates opposite the selected arrow.

故障模式