搜索维修指南

在知识库中查找维修指南、手册、症状和错误代码。

手册

症状

A straight bit or socket visibly orbits, shakes, or runs off-center during a brief no-load test.
Gói được chèn đầy đủ nhưng một hoặc cả hai tab nhả bên không giữ được, hoặc gói có thể bị kéo ra mà không cần nhấn cả hai tab.
The battery latches normally and works while still, but charging or tool power stops, restarts, or flickers when the pack or receiver is gently moved.
The bit inserts, but the collar does not return or a firm tug pulls the bit out.
Bar panduan mengarah ke samping dalam potongan atau alur melengkung meskipun benda kerja didukung dan gergaji dipegang tegak.
Chłodna wiertarka zaczyna działać, a następnie zatrzymuje się podczas krótkiego testu bez obciążenia lub lekkiej pracy.
Nach Loslassen des Abzugs schlägt das Blatt deutlich länger als normal weiter aus.
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
NO WORKLIGHT OR MOTOR RESPONSE
The direction button jams, will not hold center lock, or the tool runs in only one direction.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
Kerah menarik tetapi aksesori yang terpasang tidak keluar, atau potongan patah terjebak di chuck.
The running saw jumps, vibrates against the work, snags, or kicks backward or sideways.
The trigger binds, the drill continues after release, or speed does not follow trigger pressure safely.
Bezpieczne proste wiertło i czysta praca nie eliminują głośnego dźwięku lub drgań bez obciążenia.
The drive operates normally, but the work light stays dark, flickers, or cuts in and out with trigger use.
Il serbatoio contiene olio ma la catena rimane asciutta, il primer non dà risultati visibili o il percorso dell'olio della barra rimane asciutto.
The accessory catches or stops in the material and the tool reacts sharply in the hand.
Blatt bleibt nicht geklemmt
TRIGGER STICKS, WILL NOT RETURN, OR MOTOR KEEPS RUNNING

故障模式