搜索维修指南
在知识库中查找维修指南、手册、症状和错误代码。
A correct-looking bit will not enter fully or can be pulled out after the collar is released.
Zincir veya çubuk çalışmasından sonra kapak tam oturmaz, çubuk hizalanmaz veya kilit düğmesi doğru başlamaz.
A compatible-looking pack will not slide fully into the handle, click, or stay retained.
battery已插入但會拉出、抬起或失去固定，冇按釋放掣。可見嘅電池組同充電器結構睇落完整。
With the chuck stopped and battery removed, the top selector cannot be moved fully into range 1 or range 2, even after the chuck is turned by hand to align the gears.
The cool tool starts, then stops during a brief no-load test or light fastening task before heat builds.
The drill stalls, binds, shuts down, or has low power
With the battery removed from every tool and charger, the charge-status button cannot be pressed normally, remains depressed or has broken away.
Spoušť se plně nevrací ven, nebo motor/kotouč běží i po uvolnění spouště.
The clamp lever opens normally, but the installed blade remains trapped in the front clamp.
Narzędzie, akumulator lub ładowarka nagrzewa się nadmiernie lub ochrona wielokrotnie zatrzymuje pracę.
A straight bit or socket visibly orbits, shakes, or runs off-center during a brief no-load test.
Chłodna wiertarka zaczyna działać, a następnie zatrzymuje się podczas krótkiego testu bez obciążenia lub lekkiej pracy.
Nach Loslassen des Abzugs schlägt das Blatt deutlich länger als normal weiter aus.
Uchwyt otwiera się i zamyka, ale wiertło ślizga się, wypada lub jest wyrzucane podczas normalnej pracy.
With no fastener load, the bare or correctly fitted output sounds harsh, binds, knocks, or shakes abnormally.
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
NO WORKLIGHT OR MOTOR RESPONSE
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
The direction button jams, will not hold center lock, or the tool runs in only one direction.
FM-04: FM-04 UNEALTĂ PORNEȘTE, APOI SE OPREȘTE CÂND ESTE RECE
FM-15: FM-15 A 1/4-IN. HEX BIT WILL NOT INSERT OR LOCK
FM-11: FM-11 THE DRILL STALLS, BINDS, SHUTS DOWN, OR HAS LOW POWER
FM-08: FM-08 已裝鋸片唔能釋放
FM-17: IL SELETTORE A DUE VELOCITÀ NON SI SPOSTA TRA LE GAMME
fm-3-1: CHARGE-STATUS BUTTON IS JAMMED, BROKEN, OR WILL NOT RETURN
fm-3-1: FM-07 LA GUIDA, LA CATENA O IL COPRIPIGNONE NON SI INSTALLANO O NON SI POSIZIONANO CORRETTAMENTE
FM-09: FM-09 鑽頭滑動或唔會保持夾緊
FM-03: FM-03 THE BATTERY OR CHARGER WILL NOT BEGIN OR COMPLETE A CHARGE
FM-04: FM-04 鑽頭冷卻時斷電
FM-09: FM-09 批头、套筒或输出驱动摇摆或偏心运行
FM-15: FM-15 THE TOOL OR BATTERY OVERHEATS OR COOLING AIRFLOW IS BLOCKED
FM-27: FM-27 工具或電池包過熱，或者熱量熄火重複發生
fm-3-1-4: FM-15 工具、BATTERY或者充電器過熱
FM-31: FM-31 腳彎曲、裂開、鬆動或唔能平放
fm-2-1-3: FM-14 CHUCK COLLAR WILL NOT PULL OR RETURN
FM-21: FM-21 INTERNAL GRINDING, KNOCKING, OR SCRAPING AT NO LOAD
FM-20: FM-20 CHUCK ROTATES, BUT IMPACT ACTION IS ABSENT UNDER LOAD
FM-17: FM-17 THE BIT SLIPS OR PULLS OUT UNDER LOAD
FM-13: FM-13 WORKLIGHT IS DEAD, DIM, OR INTERMITTENT WHILE THE MOTOR RUNS