搜索维修指南

在知识库中查找维修指南、手册、症状和错误代码。

手册

症状

WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
The trigger lights the work area, but the motor stays silent and the quick-release chuck does not turn.
BATTERY SEATS BUT WILL NOT STAY LATCHED
A compatible V20 battery starts onto the tool rails but binds before reaching the normal seated and latched position.
O battery para antes da posição totalmente encaixada e o carregador não pode iniciar uma carga normal. Nenhuma rachadura visível no carregador, detritos condutivos ou pacote inchado foi confirmado até o momento.
Pemicu menyalakan area kerja, tetapi motor tetap diam dan landasan tidak bergerak.
The battery will not insert fully, click into place, remain retained, or release normally.
The battery reaches the normal seated position, but the release latch does not retain it and the pack can slide away without pressing the release button.
The direction button jams, will not hold center lock, or the tool runs in only one direction.
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
The trigger binds or does not spring fully OFF, or the motor keeps running after the trigger is released.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
Blatt bleibt nicht geklemmt
Dengan tuas penjepit berfungsi, bilah yang benar tidak dapat masuk sepenuhnya atau gagal uji tarik tangan.
Tombol maju/mundur tidak masuk, kunci tengah gagal, atau alat berjalan ke arah yang salah.
Pemicu macet, gagal kembali, atau motor tetap menyala setelah dilepaskan.
The accessory or fastener stops in the work and the tool stalls, twists, or cannot be withdrawn normally.
Kerah menarik tetapi aksesori yang terpasang tidak keluar, atau potongan patah terjebak di chuck.
The accessory catches or stops in the material and the tool reacts sharply in the hand.
Rotation and impact pulses are steady, but a normal fastener advances much more slowly than expected.

故障模式

part