搜索维修指南

在知识库中查找维修指南、手册、症状和错误代码。

型号

手册

症状

Po usunięciu battery i bez zamontowanego wiertła uchwyt nie obraca się normalnie ręcznie lub wydaje się zacięty.
The motor can be heard, but the front output remains still in both directions with the bit removed.
The bit passed initial insertion, but backs out, falls free, or loses drive while the chuck body stays secure.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
The accessory catches or stops in the material and the tool reacts sharply in the hand.
With no fastener load, the bare or correctly fitted output sounds harsh, binds, knocks, or shakes abnormally.
BATTERY WILL NOT CHARGE
The battery will not slide in, click into place, release, or remain secure in the handle.
The torque collar binds, will not stay on a setting, or the clutch slips or locks at every position.
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
BATTERY WILL NOT SEAT, LATCH, OR RELEASE
The direction lever will not reach forward, reverse, or center lock, or the selected position does not hold.
The collar pulls, but the bit will not come out, or a short/broken piece is recessed in the chuck.
The direction button jams, will not hold center lock, or the tool runs in only one direction.
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
The trigger binds or does not spring fully OFF, or the motor keeps running after the trigger is released.
The trigger lights the work area, but the motor stays silent and the quick-release chuck does not turn.
With the bit removed, the driver makes continuous abnormal grinding, knocking, or scraping.
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START

故障模式

part