搜索维修指南
在知识库中查找维修指南、手册、症状和错误代码。
The tool starts and runs at no load, but stops abruptly on an ordinary fastener with no jam or twist.
A straight bit or the empty chuck shows repeatable side-to-side runout at low no-load speed after the bit has been centered and tightened correctly.
集塵袋同集塵口鎖緊接合處漏塵
No-load operation is smooth, but the saw bounces, chatters, or vibrates as soon as cutting begins.
The blade pinches or stalls in the kerf, or the saw reacts backward during a cut.
With the blade clear of material, the saw sounds slow, hunts, or repeatedly rises and falls in speed.
motor同軸轉動，但鋸片喺墊圈上停滯或滑動，喺正常支撐切割時。
The external structure is visibly cracked, loose, crushed, melted, or missing material even if the saw still runs.
360度塵口塞住或者鬆脫，或者兼容嘅喉管/接頭唔會保持連接。
鎖定0度斜切時，聲音正常嘅鋸片唔係正方形對齊底座。
底座可以設定角度，但喺斜切桿鎖定後會移動或切割時漂移。
Spoušť se plně nevrací ven, nebo motor/kotouč běží i po uvolnění spouště.
裝咗正確嘅 battery，但按鎖定按鈕時同扳機冇產生任何 motor 反應。
A suitable bag or vacuum collects little dust while the port remains secure and aimed.
The saw or pack smokes, leaks, sparks, melts, smells burned, swells, vents, or hisses.
The blade turns steadily, but wood cuts slowly, burns, or needs heavy feed pressure.
FM-25: FM-25 工具負載下關機，無機械卡住
FM-25: IL MANDRINO O LA PUNTA OSCILLANO VISIBILMENTE A VUOTO
FM-25: 集塵袋同集塵口鎖緊接合處漏塵
FM-01: FM-01 工具完全死機 - 無LED或MOTOR
FM-23: 鑽頭喺夾頭滑動或拉出
FM-03: FM-03 BATTERY 無法滑入、就位或鎖定
FM-33: FM-33 塵口唔會轉動、保持位置或者固定喉管
FM-37: FM-37 機殼、手柄、BATTERY導軌或者通風口有裂紋或者損壞
FM-27: 所選深度喺深度桿鬆開後無法保持固定
FM-07: FM-07 扳機卡住或MOTOR喺鬆開後繼續運轉
FM-29: FM-29 斜切設定滑動或無法保持所選角度
FM-24: FM-24 下護罩無法及時關閉
FM-14: FM-14 軸鎖無法啟動或保持
FM-34: FM-34 鋸片卡住、停轉或者切割時反彈
FM-08: FM-08 無負載轉速弱、唔均勻或者波動
FM-06: FM-06 鎖定釋放掣無法阻擋扳機或回復原位
FM-36: FM-36 鋸片接觸工件時才震動或抖動
FM-30: FM-30 鋸喺斜切設定為零度時切割不方正
FM-23: 下護罩阻力大或無法完全移動
FM-04: battery卡喺鋸入面，無法取出