搜索维修指南

在知识库中查找维修指南、手册、症状和错误代码。

手册

症状

The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
O disjuntor ou GFCI desarma quando o DCB115 é conectado, e não há dano visível no cabo, líquido, fumaça, faísca, odor de queimado, derretimento ou detritos condutivos já identificados.
扳機回彈同motor停止，但LED保持亮起超過大約20秒。
The pack starts and runs a known-good compatible tool at no load, but output stops promptly during an ordinary matched task that a known-good battery completes.
The drill makes abnormal grinding or knocking, vibrates strongly, or the chuck and spindle have play.
插入充電器時斷路器或 GFCI 跳閘
La motosega taglia lentamente, produce polvere fine invece di segatura, vibra nel taglio o deve essere spinta con forza nonostante la valutazione di affilatura.
Nach Loslassen des Abzugs schlägt das Blatt deutlich länger als normal weiter aus.
Po usunięciu battery i bez zamontowanego wiertła uchwyt nie obraca się normalnie ręcznie lub wydaje się zacięty.
The drive operates normally, but the work light stays dark, flickers, or cuts in and out with trigger use.
Chain moves but does not cut
The external structure is visibly cracked, loose, crushed, melted, or missing material even if the saw still runs.
360度塵口塞住或者鬆脫，或者兼容嘅喉管/接頭唔會保持連接。
Spoušť se plně nevrací ven, nebo motor/kotouč běží i po uvolnění spouště.

故障模式

part