搜索维修指南

在知识库中查找维修指南、手册、症状和错误代码。

型号

手册

症状

Bezpieczne proste wiertło i czysta praca nie eliminują głośnego dźwięku lub drgań bez obciążenia.
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
A bit that appears clamped slips in use or visibly wobbles in a no-load test.
THE DRILL/DRIVER WILL NOT START WITH A VERIFIED BATTERY
The chuck jaws open and close normally, but a straight compatible bit rotates or pulls out during moderate drilling or driving.
Il grilletto si blocca, il trapano continua a girare o la velocità a vuoto salta invece di variare dolcemente.
The collar moves and holds a low numbered setting, but the clutch does not ratchet before a test fastener is overdriven in suitable scrap material.
The drill sounds and rotates normally with no load, does not stall, overheat, slip, or vibrate abnormally, yet a corrected drilling or fastening task progresses much more slowly than expected.
battery唔能滑入、鎖定、釋放或保持穩固喺手柄。
The forward/reverse lever binds, commands the wrong direction, or center lock fails.
電池包唔能完成充電或運行時間異常短。
With the battery removed, the keyless chuck sleeve or jaws remain seized, or a clamped bit cannot be released by normal hand rotation.
The chuck still rotates, but a new mechanical grind, knock, scrape, tight spot, or severe vibration remains with the bit removed and is not ordinary motor or brake sound.
A compatible V20 battery starts onto the tool rails but binds before reaching the normal seated and latched position.
The battery stays physically latched, but the motor, LED, or both cut out and return when the tool or battery is moved through ordinary working orientation.
The collar moves normally, but the clutch ratchets before a suitable fastener reaches normal depth at appropriate settings, or it audibly slips when drill mode is correctly selected.
The direction selector is centered, but the trigger still depresses enough to start the motor or the center position cannot reliably prevent activation.
The motor can be heard running, but the chuck remains still, pauses independently, or free-spins without transmitting normal drive in either fully selected speed range.
With the battery removed, the clutch collar is physically stuck, cracked, excessively loose, or unable to align a numbered setting or drill mode with the index mark.
With the chuck stopped and battery removed, the top selector cannot be moved fully into range 1 or range 2, even after the chuck is turned by hand to align the gears.

故障模式

part