FM-13: FM-13 WORKLIGHT IS DEAD, DIM, OR INTERMITTENT WHILE THE MOTOR RUNS

The motor runs normally but the LED worklight is dead, dim, or flickers intermittently during trigger use.

• Lens is dirty or obstructed
• Pack voltage or contact is marginal
• LED lead or lamp circuit is loose
• LED assembly has failed

1. The worklight turns on steadily whenever the trigger is depressed.

1.

Đây là bản xem trước hướng dẫn khắc phục sự cố trong sách hướng dẫn sửa chữa đầy đủ.

• The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.

  The motor runs normally, but the LED is dead, dim, or 1. Confirm the motor runs steadily, then remove the pack before inspecting the

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

Trang công khai chỉ hiển thị bản xem trước. Mua hướng dẫn đầy đủ để tải toàn bộ các bước sửa chữa, sơ đồ và quy trình xác minh.