Testere Sağlam Bir Bıçakla Öğütme, Kazıma, Vurma veya Şiddetli Titreşim Yapar

Doğruluğu doğrulanmış, doğru sıkılmış bir bıçak döner, ancak testere boşta veya hafif kesimde yıkıcı mekanik gürültü veya güçlü titreşim üretir.

• Lower or upper guard is contacting the blade
• Bearing, spindle, gear, or motor rotor is damaged
• Foreign debris is inside the guard or drive area
• Shoe, handle, housing, or gearcase is loose or cracked

1. The repaired saw hand-turns smoothly and runs at no load and through a light cut without grinding, scraping, knocking, abnormal play, or heavy vibration.

1. Release the trigger, wait for a complete stop, remove the battery, and do not keep running the saw to identify a destructive sound.
2. - Confirm the blade is sound, correct, centered, and clamped - clear dry external debris and check both guards, shoe, handles, and housing for visible contact
3. With the battery removed, hand-turn the blade and feel for scrape, roughness, play, knock, or a point of binding.
4. If a sound blade still produces internal roughness, noise, play, or heavy vibration, keep the saw out of service for authorized spindle, bearing, gearcase,

Bu, tam onarım kılavuzunda yer alan sorun giderme rehberinin bir önizlemesidir.

• FM-17: Fm Dcs578 17

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

Herkese açık sayfalar yalnızca önizleme gösterir. Eksiksiz onarım adımları, diyagramlar ve doğrulama prosedürlerini indirmek için tam kılavuzu satın alın.