Tetik Kilit Düğmesi Takılmış veya Artık Tetiği Engellemiyor

Kilitleme düğmesine basılamıyor, geri dönmüyor veya tetik kilitleme işlemi olmadan tetiğin hareket etmesine izin veriyor.

• Sawdust or impact damage is jamming the external button
• Lock-off spring, button, or housing guide is broken or displaced
• Trigger or switch housing is cracked or distorted
• Internal switch assembly has failed

1. With the battery removed, the trigger is positively blocked at rest and moves only while the lock-off is deliberately operated.

1. Remove the battery before testing the lock-off, and keep fingers away from the trigger until power is removed.
2. - Inspect the button and surrounding housing for cracks, binding, packed sawdust, or a button that does not return - clean externally with a dry brush or dry
3. With no battery installed, press and release the lock-off several times while confirming that the trigger is blocked at rest and moves only during delibera
4. - If the control remains stuck, broken, or unable to block the trigger, do not reinstall the battery - route the complete saw for authorized switch and housin

Bu, tam onarım kılavuzunda yer alan sorun giderme rehberinin bir önizlemesidir.

• FM-07: Fm Dcs578 07

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

Herkese açık sayfalar yalnızca önizleme gösterir. Eksiksiz onarım adımları, diyagramlar ve doğrulama prosedürlerini indirmek için tam kılavuzu satın alın.