failure mode
FM-24: OTOMATİK MİL KİLİDİ MANDRENI TUTMAZ
FM-24
Tanı özeti
FM-24
Olası Kök Nedenler
- Spindle has not reached the lock position
- Gear train is between teeth and needs slight hand rotation
- Spindle-lock or gearbox component is worn or broken
- Chuck body is loose on the spindle
Hızlı Kontroller
- The spindle lock holds the empty chuck for normal hand tightening and loosening, or the lock fault is proven.
Onarım Önizlemesi
- Inspect for a loose chuck body, unusual free play, or grinding while keeping the tool unpowered.
- If the spindle never locks or the chuck body is loose, route the chuck, spindle lock, gearbox, or spindle to service.
- Remove the battery and test the spindle lock only with an empty chuck.
- Turn the chuck gently through a small angle, then retry the sleeve so the internal lock can engage.
Bu, tam onarım kılavuzunda yer alan sorun giderme rehberinin bir önizlemesidir.
İlgili belirtiler
battery çıkarılmış ve mandren boşken, kovanı çevirmek mil ve motor serbestçe döndürür, mandreni elle sıkmak veya gevşetmek için yeterli kilit sağlamaz.
battery çıkarılmış ve mandren boşken, kovan mil ve battery serbestçe döner, mandreni elle sıkmak veya gevşetmek için yeterli kilit sağlamaz.
Tam kılavuza dahil
- root cause analysis
- tools needed
- step-by-step repair procedure
- diagrams
- exploded views
- post-repair checks
Herkese açık sayfalar yalnızca önizleme gösterir. Eksiksiz onarım adımları, diyagramlar ve doğrulama prosedürlerini indirmek için tam kılavuzu satın alın.