Sågen ger slipande, skrapande, knackande eller kraftig vibration med en hel klinga

En verifierat rak, korrekt klämd klinga roterar, men sågen ger destruktivt mekaniskt ljud eller stark vibration vid tomgång eller vid lätt sågning.

• Lower or upper guard is contacting the blade
• Bearing, spindle, gear, or motor rotor is damaged
• Foreign debris is inside the guard or drive area
• Shoe, handle, housing, or gearcase is loose or cracked

1. The repaired saw hand-turns smoothly and runs at no load and through a light cut without grinding, scraping, knocking, abnormal play, or heavy vibration.

1. Release the trigger, wait for a complete stop, remove the battery, and do not keep running the saw to identify a destructive sound.
2. - Confirm the blade is sound, correct, centered, and clamped - clear dry external debris and check both guards, shoe, handles, and housing for visible contact
3. With the battery removed, hand-turn the blade and feel for scrape, roughness, play, knock, or a point of binding.
4. If a sound blade still produces internal roughness, noise, play, or heavy vibration, keep the saw out of service for authorized spindle, bearing, gearcase,

Det här är en förhandsgranskning av felsökningsvägledningen i den fullständiga reparationsmanualen.

• FM-17: Fm Dcs578 17

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

Offentliga sidor visar endast en förhandsgranskning. Köp den fullständiga manualen för att ladda ner alla reparationssteg, diagram och verifieringsprocedurer.