FM-13: FM-13 WORKLIGHT IS DEAD, DIM, OR INTERMITTENT WHILE THE MOTOR RUNS

The motor runs normally but the LED worklight is dead, dim, or flickers intermittently during trigger use.

• Lens is dirty or obstructed
• Pack voltage or contact is marginal
• LED lead or lamp circuit is loose
• LED assembly has failed

1. The worklight turns on steadily whenever the trigger is depressed.

1.

Det här är en förhandsgranskning av felsökningsvägledningen i den fullständiga reparationsmanualen.

• The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.

  The motor runs normally, but the LED is dead, dim, or 1. Confirm the motor runs steadily, then remove the pack before inspecting the

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

Offentliga sidor visar endast en förhandsgranskning. Köp den fullständiga manualen för att ladda ner alla reparationssteg, diagram och verifieringsprocedurer.