model
CMCD700C1
Craftsman CMCD700C1 — аккумуляторная дрель/шуруповерт 1/2 дюйма с питанием от литий-ионной системы V20 battery. Оснащён коллекторным motor с электрическим тормозом, двухскоростной коробкой передач, быстрозажимным патроном с автоматической блокировкой шпинделя и светодиодной подсветкой для улучшения видимости.
0% успешных ремонтов по отзывам
Получите полное руководство по ремонту — сэкономьте 60 $–90 $
Сведения о модели
Номер модели: CMCD700C1
Также известна как: CMCD700, V20 Drill/Driver, CMCD700C1
Руководства по ремонту
Симптомы
- Звуковой аккумулятор V20 battery полностью установлен, кнопка направления полностью вперёд или назад, и инструмент не издаёт звука motor, не реагирует светодиод и патрон не вращается. Состояние отсутствия работы сохраняется при неподвижном удержании инструмента.
Звуковой V20 battery полностью установлен, кнопка направления полностью 1. Центрируйте кнопку направления, снимите battery и осмотрите инструмент и аккумулятор на наличие
- A compatible V20 battery starts onto the tool rails but binds before reaching the normal seated and latched position.
A compatible V20 battery starts onto the tool rails but binds 1. Stop pushing and withdraw the binding battery straight off the rails without
- The collar moves normally, but the clutch ratchets before a suitable fastener reaches normal depth at appropriate settings, or it audibly slips when drill mode is correctly selected.
The collar moves normally, but the clutch ratchets before a 1. Release the trigger at early ratcheting, remove the battery, and verify the collar is
- With the battery removed, the keyless chuck sleeve or jaws remain seized, or a clamped bit cannot be released by normal hand rotation.
With the battery removed, the keyless chuck sleeve or jaws 1. Center the direction button, remove the battery, support the tool, and support any
- The drill sounds and rotates normally with no load, does not stall, overheat, slip, or vibrate abnormally, yet a corrected drilling or fastening task progresses much more slowly than expected.
The drill sounds and rotates normally with no load, does not 1. Remove the battery and inspect or replace the bit before changing any tool
- При остановленном патроне и снятом battery верхний селектор не может быть полностью переведён в диапазон 1 или 2, даже после поворота патрона вручную для выравнивания шестерён.
При остановленном патроне и снятом battery верхний селектор 1. Полностью остановите патрон и снимите battery перед переключением скорости
- With the battery removed, the clutch collar is physically stuck, cracked, excessively loose, or unable to align a numbered setting or drill mode with the index mark.
With the battery removed, the clutch collar is physically stuck, 1. Remove the battery before turning or inspecting the mode/torque collar.
- Аккумулятор V20 battery комнатной температуры полностью установлен в одобренное зарядное устройство с питанием, но нормальная зарядка не начинается или индикатор завершения зарядки не появляется.
Аккумулятор V20 комнатной температуры полностью установлен в 1. Снимите battery с зарядного устройства и осмотрите аккумулятор, зарядное устройство, шнур и
- The chuck jaws open and close normally, but a straight compatible bit rotates or pulls out during moderate drilling or driving.
The chuck jaws open and close normally, but a straight 1. Release the trigger, remove the battery, and remove or catch the loose bit before
- The collar moves and holds a low numbered setting, but the clutch does not ratchet before a test fastener is overdriven in suitable scrap material.
The collar moves and holds a low numbered setting, but the 1. Remove the battery and set up a matching fastener and sound driver bit in
- The chuck still rotates, but a new mechanical grind, knock, scrape, tight spot, or severe vibration remains with the bit removed and is not ordinary motor or brake sound.
The chuck still rotates, but a new mechanical grind, knock, 1. Stop at the first new mechanical noise or severe vibration, remove the battery, and
- ДРЕЛЬ/ШУРУПОВЕРТ НЕ ЗАПУСКАЕТСЯ С ПОДТВЕРЖДЕННЫМ BATTERY
FM-01 ДРЕЛЬ/ШУРУПОВЕРТ НЕ ЗАПУСКАЕТСЯ С ПОДТВЕРЖДЕННЫМ FM-09 ВРЕМЯ РАБОТЫ BATTERY ЗНАЧИТЕЛЬНО МЕНЬШЕ ОЖИДАЕМОГО
Режимы неисправностей
- FM-01: ДРЕЛЬ/ШУРУПОВЕРТ НЕ ЗАПУСКАЕТСЯ С ПОДТВЕРЖДЕННЫМ BATTERY
Дрель/шуруповерт не запускается, даже если установлен подтвержденный полностью заряженный аккумулятор V20 battery и кнопка направления полностью вперед или назад. Нет звука motor, активности светодиода или движения патрона, инструмент остается неотзывчивым.
- FM-17: ПЕРЕКЛЮЧАТЕЛЬ ДВУХ СКОРОСТЕЙ НЕ ПЕРЕМЕЩАЕТСЯ МЕЖДУ ДИАПАЗОНАМИ
НАБОР ДРЕЛИ/ШУРУПОВЕРТА CRAFTSMAN CMCD700C1 V20 1/2 ДЮЙМА — КОЛЛЕКТОРНЫЙ MOTOR — 2 СКОРОСТИ — БЫСТРОЗАЖИМНОЙ ПАТРОН — LED
- FM-25: ПАТРОН ИЛИ БИТА ВИДИМО ДЕРГАЮТСЯ ПРИ ОТСУТСТВИИ НАГРУЗКИ
Патрон или бита показывают видимое боковое биение или люфт на низких скоростях без нагрузки после правильного центрирования и затяжки биты.
- FM-15: ИНСТРУМЕНТ РАБОТАЕТ ТОЛЬКО В ОДНОМ НАПРАВЛЕНИИ ИЛИ ПРОТИВОПОЛОЖНО ВЫБОРУ
Селектор направления инструмента перемещается нормально и удерживает фиксаторы, но патрон вращается только в одном направлении или вращается в противоположную выбранному направлению сторону.
- FM-22: ПАТРОН НЕ ОТКРЫВАЕТСЯ ИЛИ ЗАКРЫВАЕТСЯ ВРУЧНУЮ, ИЛИ СВЕРЛО НЕ МОЖНО ОСВОБОДИТЬ
ПАТРОН НЕ ОТКРЫВАЕТСЯ ИЛИ ЗАКРЫВАЕТСЯ ВРУЧНУЮ, ИЛИ СВЕРЛО НЕ МОЖНО ОСВОБОДИТЬ
- FM-06: ПИТАНИЕ ПРЕРЫВАЕТСЯ ПРИ ДВИЖЕНИИ ИНСТРУМЕНТА ИЛИ BATTERY
прерывание питания, зависящее от движения.
Связанная диагностика
Common symptoms
- Звуковой аккумулятор V20 battery полностью установлен, кнопка направления полностью вперёд или назад, и инструмент не издаёт звука motor, не реагирует светодиод и патрон не вращается. Состояние отсутствия работы сохраняется при неподвижном удержании инструмента.
- A compatible V20 battery starts onto the tool rails but binds before reaching the normal seated and latched position.
- The collar moves normally, but the clutch ratchets before a suitable fastener reaches normal depth at appropriate settings, or it audibly slips when drill mode is correctly selected.
- With the battery removed, the keyless chuck sleeve or jaws remain seized, or a clamped bit cannot be released by normal hand rotation.
- The drill sounds and rotates normally with no load, does not stall, overheat, slip, or vibrate abnormally, yet a corrected drilling or fastening task progresses much more slowly than expected.
- При остановленном патроне и снятом battery верхний селектор не может быть полностью переведён в диапазон 1 или 2, даже после поворота патрона вручную для выравнивания шестерён.
- With the battery removed, the clutch collar is physically stuck, cracked, excessively loose, or unable to align a numbered setting or drill mode with the index mark.
- Аккумулятор V20 battery комнатной температуры полностью установлен в одобренное зарядное устройство с питанием, но нормальная зарядка не начинается или индикатор завершения зарядки не появляется.
- The chuck jaws open and close normally, but a straight compatible bit rotates or pulls out during moderate drilling or driving.
- The collar moves and holds a low numbered setting, but the clutch does not ratchet before a test fastener is overdriven in suitable scrap material.