Szukaj poradników naprawczych
Znajdź poradniki naprawcze, instrukcje, objawy i kody błędów w bazie wiedzy.
The collar pulls, but the bit will not come out, or a short/broken piece is recessed in the chuck.
The bit passed initial insertion, but backs out, falls free, or loses drive while the chuck body stays secure.
The motor can be heard, but the front output remains still in both directions with the bit removed.
The accessory catches or stops in the material and the tool reacts sharply in the hand.
The bit rotates, but no impact pulses begin when a correct fastener provides normal resistance.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
Prosty bit pozostaje zaciskany, ale obraca się poza środek lub korpus uchwytu ma widoczne luzy.
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
NO WORKLIGHT OR MOTOR RESPONSE
BATTERY LUB ŁADOWARKA NIE ROZPOCZYNA ANI NIE KOŃCZY ŁADOWANIA
BATTERY NIE OSIADA, NIE ZATRZASKUJE SIĘ, NIE ZWALNIA ANI NIE UTRZYMUJE BEZPIECZNIE
Brak diody LED lub reakcji motor
The direction button jams, will not hold center lock, or the tool runs in only one direction.
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
The trigger binds or does not spring fully OFF, or the motor keeps running after the trigger is released.
The trigger lights the work area, but the motor stays silent and the quick-release chuck does not turn.
Bieg do przodu lub do tyłu nie włącza się, lub pozycja środkowa nie blokuje spustu.
Po usunięciu battery i bez zamontowanego wiertła uchwyt nie obraca się normalnie ręcznie lub wydaje się zacięty.
FM-16: FM-16 BIT WILL NOT RELEASE, OR A SHORT OR BROKEN BIT IS TRAPPED
FM-07: FM-07: A compatible pack stops on the rails, will not reach full
FM-11: FM-11: Ładowanie rozpoczyna się, jest opóźnione lub nigdy nie osiąga pełnego poziomu
FM-18: FM-18 A KNOWN-STRAIGHT BIT SHOWS VISIBLE WOBBLE OR RUNOUT
FM-21: FM-21 INTERNAL GRINDING, KNOCKING, OR SCRAPING AT NO LOAD
FM-05: FM-05 SPEED WILL NOT VARY, SURGES, OR CUTS ERRATICALLY
FM-01: FM-01 NO WORKLIGHT OR MOTOR RESPONSE
fm-2-1-4: FM-22 BIT BINDS, TOOL STALLS, TWISTS, OR STOPS IN THE WORK
FM-04: FM-04 ELECTRIC BRAKE MISSES OR THE ANVIL COASTS TOO LONG
FM-17: FM-17 THE BIT SLIPS OR PULLS OUT UNDER LOAD
FM-04: FM-04 WIERTARKA WYŁĄCZA SIĘ PODCZAS CHŁODZENIA
FM-15: FM-15 A 1/4-IN. HEX BIT WILL NOT INSERT OR LOCK
FM-13: FM-13 WORKLIGHT IS DEAD, DIM, OR INTERMITTENT WHILE THE MOTOR RUNS
FM-02: FM-02 BATTERY NIE WSUWA SIĘ, NIE ZATRZASKUJE ANI NIE ZWALNIA
fm-2-1-2: FM-06 DIRECTION CONTROL JAMS, WILL NOT LOCK OFF, OR LOSES ONE DIRECTION
FM-05: FM-05 SPUST ZACINA SIĘ LUB KONTROLA PRĘDKOŚCI JEST NIEBEZPIECZNA
fm-2-1-3: FM-14 CHUCK COLLAR WILL NOT PULL OR RETURN
FM-02: FM-02 WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
FM-20: FM-20 CHUCK ROTATES, BUT IMPACT ACTION IS ABSENT UNDER LOAD
FM-19: FM-19 MOTOR RUNS, BUT THE CHUCK AND ANVIL DO NOT ROTATE
Kołnierz trybu lub momentu obrotowego
Charged pack
Known-good charged compatible pack
Eye protection
Bit wkrętakowy lub uchwyt bitu
Wbudowany uchwyt na wiertła
متوافق مع battery
Ładowarka i wskaźnik
Spust o zmiennej prędkości
Wyjmowalny 20V MAX* battery
Prosty bit wiertarski z okrągłym trzonkiem
Kompatybilny pakiet 12V MAX* battery
przedmiot obrabiany
Ten przewodnik
timer
Zatwierdzona ładowarka battery
Zimny naładowany sprawdzony battery