Et rett kutt driver sidelengs eller kuttindikatoren stemmer ikke med bladets bane

Med skoen flat og skråvinkelen på null, driver sagen til venstre eller høyre fra rettlederen, eller kuttindikatoren peker konsekvent til en annen venstre-høyre bladbane.

• Operator is forcing a correction or side-loading the saw
• Blade is dull, bent, wrong, or has uneven tooth set
• Kerf indicator is being read from the wrong blade side or is damaged
• Shoe, spindle, or guard alignment is bent or loose Straightedge or guide; square; sharp straight blade; supported marked scrap.

1. A supported zero-bevel cut tracks straight and the kerf indicator consistently predicts the blade path without side force.

1. Stop the cut, let the blade stop, remove the battery, and do not force the saw sideways inside the kerf.
2. Fit a verified straight sharp blade, set zero bevel and correct depth, secure both levers, and inspect the shoe and kerf indicator for bend or looseness.
3. Mark supported scrap, align the indicator with the left or inner side of the blade path as the manual specifies, and use a straightedge without side pressu
4. If repeated cuts still drift or the indicator cannot agree with the actual blade path, stop and route the shoe, indicator, spindle, and guard alignment for

Dette er en forhåndsvisning av feilsøkingsveiledningen som er inkludert i den fullstendige reparasjonsmanualen.

• FM-20: Fm Dcs578 20

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

Offentlige sider viser bare en forhåndsvisning. Kjøp den fullstendige manualen for å laste ned fullstendige reparasjonstrinn, diagrammer og verifiseringsprosedyrer.