修理ガイドを検索

ナレッジベース全体で修理ガイド、マニュアル、症状、エラーコードを検索できます。

マニュアル

症状

The motor can be heard, but the front output remains still in both directions with the bit removed.
With the battery removed, the clutch collar is physically stuck, cracked, excessively loose, or unable to align a numbered setting or drill mode with the index mark.
Motor sound is present, but the anvil and installed bit remain stationary.
The cap will not close, the primer is split or stuck, or the oil-level indicator is cracked, clouded, or leaking.
The cool dry pack has a visibly cracked, missing, loose or distorted rail, release button, latch feature or molded support, whether or not insertion has been attempted.
パッドが回転中に異常な駆動接触音が発生する
チャージャーはbatteryの挿入または取り外し中に揺れたり滑ったり、screwsから浮いたり引き離されたりするが、背面のキーホールスロットと筐体は目視で正常に見える。
A compatible V20 battery starts onto the tool rails but binds before reaching the normal seated and latched position.
A straight bit or the empty chuck shows repeatable side-to-side runout at low no-load speed after the bit has been centered and tightened correctly.
batteryは物理的にラッチされているが、motor、LED、または両方が工具またはbatteryの通常の作業姿勢で動かすと切れたり戻ったりする。
batteryを取り外しチャックが空の状態で、スリーブを回すとチャックを手で締めたり緩めたりするのに十分なロックを提供せず、スピンドルとmotorが自由に回転します。
motorは回っている音がするが、チャックは動かず、独立して停止したり、どちらの速度範囲でも正常な駆動を伝達せず空回りする。
The chuck jaws open and close normally, but a straight compatible bit rotates or pulls out during moderate drilling or driving.
The chuck still rotates, but a new mechanical grind, knock, scrape, tight spot, or severe vibration remains with the bit removed and is not ordinary motor or brake sound.
The collar moves and holds a low numbered setting, but the clutch does not ratchet before a test fastener is overdriven in suitable scrap material.
The collar moves normally, but the clutch ratchets before a suitable fastener reaches normal depth at appropriate settings, or it audibly slips when drill mode is correctly selected.
The direction selector is centered, but the trigger still depresses enough to start the motor or the center position cannot reliably prevent activation.
The drill sounds and rotates normally with no load, does not stall, overheat, slip, or vibrate abnormally, yet a corrected drilling or fastening task progresses much more slowly than expected.
With the battery removed, the keyless chuck sleeve or jaws remain seized, or a clamped bit cannot be released by normal hand rotation.
チャックが停止しbatteryを外した状態で、チャックを手で回してギアを整列させてもトップセレクターがレンジ1またはレンジ2に完全に動かない。

故障モード

part