修理ガイドを検索
ナレッジベース全体で修理ガイド、マニュアル、症状、エラーコードを検索できます。
BATTERY WILL NOT SEAT, LATCH, OR RELEASE
充電され、ラッチされたbatteryと正常なトリガー操作でチャックが回転しない。
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
NO WORKLIGHT OR MOTOR RESPONSE
The accessory catches or stops in the material and the tool reacts sharply in the hand.
The bit passed initial insertion, but backs out, falls free, or loses drive while the chuck body stays secure.
The motor can be heard, but the front output remains still in both directions with the bit removed.
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
The running saw jumps, vibrates against the work, snags, or kicks backward or sideways.
The bit rotates, but no impact pulses begin when a correct fastener provides normal resistance.
The forward/reverse button sticks, commands the wrong rotation, or center does not lock the trigger.
Bit jams or drill stalls
Unit shuts off abruptly
Borrspetsen fastnar, motor stannar, eller borren vrider sig kraftigt i händerna under arbete.
Bilah meninggalkan garis, melentur berlebihan, melengkung, atau patah selama potongan yang terkendali.
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
The trigger lights the work area, but the motor stays silent and the quick-release chuck does not turn.
FM-07: FM-07: A compatible pack stops on the rails, will not reach full
FM-01: FM-01 NO WORKLIGHT OR MOTOR RESPONSE
FM-08: FM-08 チャックが開かない、閉まらない、またはビットを受け付けない
FM-13: Fm-13 Le frein électrique ne stoppe pas la lame rapidement
FM-08: FM-08 LA LAME INSTALLÉE NE SE LIBÈRE PAS
FM-18: FM-18 A KNOWN-STRAIGHT BIT SHOWS VISIBLE WOBBLE OR RUNOUT
FM-15: FM-15 A 1/4-IN. HEX BIT WILL NOT INSERT OR LOCK
FM-16: FM-16 BIT WILL NOT RELEASE, OR A SHORT OR BROKEN BIT IS TRAPPED
FM-05: FM-05 SPEED WILL NOT VARY, SURGES, OR CUTS ERRATICALLY
FM-13: FM-13 WORKLIGHT IS DEAD, DIM, OR INTERMITTENT WHILE THE MOTOR RUNS
fm-2-1-4: FM-22 BIT BINDS, TOOL STALLS, TWISTS, OR STOPS IN THE WORK
FM-03: FM-03 TRIGGER STICKS OR THE MOTOR CONTINUES AFTER RELEASE
fm-2-1-3: FM-14 CHUCK COLLAR WILL NOT PULL OR RETURN
FM-02: FM-02 WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
FM-04: FM-04 ELECTRIC BRAKE MISSES OR THE ANVIL COASTS TOO LONG
FM-17: FM-17 THE BIT SLIPS OR PULLS OUT UNDER LOAD
FM-19: FM-19 MOTOR RUNS, BUT THE CHUCK AND ANVIL DO NOT ROTATE
fm-2-1-2: FM-06 DIRECTION CONTROL JAMS, WILL NOT LOCK OFF, OR LOSES ONE DIRECTION
FM-20: FM-20 CHUCK ROTATES, BUT IMPACT ACTION IS ABSENT UNDER LOAD
FM-21: FM-21 INTERNAL GRINDING, KNOCKING, OR SCRAPING AT NO LOAD