FM-11: PENYESUAIAN KEDALAMAN ATAU BEVEL TIDAK BERGERAK ATAU TIDAK BERHENTI

Mekanisme penyesuaian kedalaman atau bevel tidak bergerak, terkunci, atau tidak mempertahankan pengaturan, menyebabkan potongan tidak akurat dan operasi tidak aman.

• Sawdust or resin is packed in a pivot or scale
• Lever or knob is not fully released or tightened
• Threads, cam, pivot, or scale are worn
• Shoe or linkage is bent from impact
• External adjustment hardware is cracked or missing

1. The shoe moves smoothly when released, locks without slip, and preserves the selected depth and angle.

1. Clean accessible sawdust and resin from the pivot, scale, and external threads with a dry brush and cloth; do not force the mechanism.
2. Set the depth or angle, lock it firmly, and push on the shoe by hand to verify it cannot shift; reject any cracked lever, knob, or bent linkage.
3. If the adjustment remains jammed, stripped, or unable to hold, replace only approved owner-accessible hardware or route the saw to service before cutting.
4. Remove the battery and support the shoe, then release only the depth lever or bevel knob for the adjustment being checked.

This is a preview of the troubleshooting guidance included in the full repair manual.

• Perangkat keras penyesuaian eksternal

• Sepatu tidak dapat berputar atau meluncur, tuas kedalaman atau kenop bevel tidak dapat mengunci, atau pengaturan bergeser saat penanganan atau pemotongan.

  Sepatu tidak dapat berputar atau meluncur, tuas kedalaman atau kenop kemiringan 1. Lepaskan battery dan dukung sepatu, lalu lepaskan hanya tuas kedalaman atau kenop kemiringan untuk pengaturan yang diperiksa.

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

Public pages show a preview only. Purchase the full manual to download complete repair steps, diagrams, and verification procedures.