Symptoms
Browse documented symptoms and jump into matching repair guides from search results.
The accessory or fastener stops in the work and the tool stalls, twists, or cannot be withdrawn normally.
0 related manual
Find guides →
Smoke, liquid, swelling, or major damage
0 related manual
Find guides →
The chuck sleeve or jaws bind, fail to center, trap a bit, or cannot grip it.
0 related manual
Find guides →
स्पिंडल लॉक जुड़ता नहीं है, दिया गया रिंच bolt नहीं घुमाता, या ब्लेड bolt जाम, स्ट्रिप्ड, या क्रॉस-थ्रेडेड है।
0 related manual
Find guides →
The direction selector is centered, but the trigger still depresses enough to start the motor or the center position cannot reliably prevent activation.
0 related manual
Find guides →
The charger housing becomes much hotter than normal charging warmth or operation repeatedly pauses as the charger heats, but there is no smoke, spark, burning odor, liquid, melting, swollen pack, or visible structural damage.
0 related manual
Find guides →
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
0 related manual
Find guides →
Charger green LED flashes
0 related manual
Find guides →
The collar pulls but the installed accessory will not come out, or a broken piece is trapped in the chuck.
0 related manual
Find guides →
The battery shows a credible high charge or has just completed a proven charge, remains fully latched and still gives no response in a known-good compatible tool while stationary.
0 related manual
Find guides →
चक रुकने और battery हटाने के बाद, शीर्ष चयनकर्ता रेंज 1 या रेंज 2 में पूरी तरह से नहीं चलता, भले ही चक को हाथ से गियर संरेखण के लिए घुमाया गया हो।
0 related manual
Find guides →
जब DCB115 जुड़ा होता है तो ब्रांच ब्रेकर या GFCI खुलता है, और कोई दृश्य कॉर्ड क्षति, तरल, धुआं, चिंगारी, जलने की गंध, पिघलना, या चालक मलबा पहले से पहचाना नहीं गया है।
0 related manual
Find guides →
A bit that appears clamped slips in use or visibly wobbles in a no-load test.
0 related manual
Find guides →
The battery latches normally and works while still, but charging or tool power stops, restarts, or flickers when the pack or receiver is gently moved.
0 related manual
Find guides →
The bit inserts, but the collar does not return or a firm tug pulls the bit out.
0 related manual
Find guides →
Charger green LED stays on
0 related manual
Find guides →
A correct-looking bit will not enter fully or can be pulled out after the collar is released.
0 related manual
Find guides →
A known-straight, fully retained 1/4-in. hex bit traces a visible circle at no load.
0 related manual
Find guides →
The pack starts and runs a known-good compatible tool at no load, but output stops promptly during an ordinary matched task that a known-good battery completes.
0 related manual
Find guides →
Direction button is centered
0 related manual
Find guides →