Search repair guides

Find repair guides, manuals, symptoms, and error codes across the knowledge base.

Models

Manuals

Symptoms

Pemicu macet, gagal kembali, atau motor tetap menyala setelah dilepaskan.
The blade pinches or stalls in the kerf, or the saw reacts backward during a cut.
The motor can be heard, but the front output remains still in both directions with the bit removed.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
इंस्टॉल किया गया ब्लेड ढीला, हिलता, फिसलता, या केंद्र से बाहर चलता है
Trigger binds, fails to return, changes speed erratically, or does not stop the drive.
After trigger release, the bit or square drive coasts noticeably longer than normal before stopping.
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
The direction lever will not reach forward, reverse, or center lock, or the selected position does not hold.
Tool rotates, but a seated fastener gets little torque or no normal impact pulse.
A straight bit or the empty chuck shows repeatable side-to-side runout at low no-load speed after the bit has been centered and tightened correctly.
360-डिग्री धूल पोर्ट जाम या ढीला है, या एक संगत नली/कपलर जुड़ा नहीं रहता।
The external structure is visibly cracked, loose, crushed, melted, or missing material even if the saw still runs.
The quick-release collar binds, will not move fully forward, or stays forward after release.
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
Prosty bit pozostaje zaciskany, ale obraca się poza środek lub korpus uchwytu ma widoczne luzy.
एक चार्ज्ड पैक इंस्टॉल है, लेकिन ट्रिगर कोई वर्कलाइट, motor ध्वनि, या एंविल मूवमेंट उत्पन्न नहीं करता।
BATTERY WILL NOT CHARGE
Bezpieczne proste wiertło i czysta praca nie eliminują głośnego dźwięku lub drgań bez obciążenia.

Failure Modes

part