Search repair guides

Find repair guides, manuals, symptoms, and error codes across the knowledge base.

Models

Manuals

Symptoms

The tool works until the pack, handle, or tool is bumped or shifted, then loses power.
The accessory catches or stops in the material and the tool reacts sharply in the hand.
The bit passed initial insertion, but backs out, falls free, or loses drive while the chuck body stays secure.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
The motor can be heard, but the front output remains still in both directions with the bit removed.
battery nie wsuwa się całkowicie do uchwytu, nie pozostaje zatrzymany lub nie zwalnia normalnie.
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
The collar pulls, but the bit will not come out, or a short/broken piece is recessed in the chuck.
The chuck, housing, handle, battery mount, labels, or vents are loose, cracked, obstructed, or damaged.
The battery will not slide in, click into place, release, or remain secure in the handle.
The battery will not slide fully into the handle, lock in place, stay retained, or release normally.
The drill stalls, binds, shuts down, or has low power
The direction button jams, will not hold center lock, or the tool runs in only one direction.
Tool rotates, but a seated fastener gets little torque or no normal impact pulse.
THE TOOL OR BATTERY HAS SMOKE, LIQUID, SWELLING, OR BURNING ODOR
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
The drill stops early or gives far less runtime than expected without unusual heat.
The direction lever will not reach forward, reverse, or center lock, or the selected position does not hold.
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START

Failure Modes

part