Search repair guides

Find repair guides, manuals, symptoms, and error codes across the knowledge base.

Models

Symptoms

The direction lever will not reach forward, reverse, or center lock, or the selected position does not hold.
Tool rotates, but a seated fastener gets little torque or no normal impact pulse.
360-डिग्री धूल पोर्ट जाम या ढीला है, या एक संगत नली/कपलर जुड़ा नहीं रहता।
The external structure is visibly cracked, loose, crushed, melted, or missing material even if the saw still runs.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
The motor can be heard, but the front output remains still in both directions with the bit removed.
Spoušť se plně nevrací ven, nebo motor/kotouč běží i po uvolnění spouště.
Trigger binds, fails to return, changes speed erratically, or does not stop the drive.
After trigger release, the bit or square drive coasts noticeably longer than normal before stopping.
With no fastener load, the bare or correctly fitted output sounds harsh, binds, knocks, or shakes abnormally.
A straight bit or socket visibly orbits, shakes, or runs off-center during a brief no-load test.
A seated battery shows no charge response, or charge never reaches a usable full state.
The cool tool starts, then stops during a brief no-load test or light fastening task before heat builds.
The battery will not slide fully into the handle, lock in place, stay retained, or release normally.
Tool or battery becomes abnormally hot, smells hot, or repeats heat shutdown after light use.
The bar is bent or cracked, chain links or cutters are broken, or the guide-bar scabbard is split, missing, or will not stay on.
वर्कलाइट चालू होती है लेकिन Motor और ब्लेड शुरू नहीं होते
Prosty bit pozostaje zaciskany, ale obraca się poza środek lub korpus uchwytu ma widoczne luzy.
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START

Failure Modes

part