Search repair guides

Find repair guides, manuals, symptoms, and error codes across the knowledge base.

Models

Symptoms

The collar pulls, but the bit will not come out, or a short/broken piece is recessed in the chuck.
The bit passed initial insertion, but backs out, falls free, or loses drive while the chuck body stays secure.
The motor can be heard, but the front output remains still in both directions with the bit removed.
The accessory catches or stops in the material and the tool reacts sharply in the hand.
The bit rotates, but no impact pulses begin when a correct fastener provides normal resistance.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
NO WORKLIGHT OR MOTOR RESPONSE
Kerah menarik tetapi aksesori yang terpasang tidak keluar, atau potongan patah terjebak di chuck.
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
The direction lever will not reach forward, reverse, or center lock, or the selected position does not hold.
The direction button jams, will not hold center lock, or the tool runs in only one direction.
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
The trigger binds or does not spring fully OFF, or the motor keeps running after the trigger is released.
The trigger lights the work area, but the motor stays silent and the quick-release chuck does not turn.
Forward or reverse will not engage, or the center position will not lock the trigger.
A correct-looking bit will not enter fully or can be pulled out after the collar is released.
कोई लोड न होने पर motor शुरू होता है, लेकिन गति में डेड बैंड, उतार-चढ़ाव, कट-आउट, या ट्रिगर दबाव को अनदेखा करता है।

Failure Modes

part