Search repair guides

Find repair guides, manuals, symptoms, and error codes across the knowledge base.

Models

Symptoms

Motor sound is present, but the anvil and installed bit remain stationary.
The bit rotates, but a real fastening load never produces the normal impact sound or pulses.
The bit inserts, but the collar does not return or a firm tug pulls the bit out.
एक चार्ज्ड पैक इंस्टॉल है, लेकिन ट्रिगर कोई वर्कलाइट, motor ध्वनि, या एंविल मूवमेंट उत्पन्न नहीं करता।
The accessory or fastener stops in the work and the tool stalls, twists, or cannot be withdrawn normally.
The charger shows charging or hot/cold delay, but the pack never reaches its normal charged indication.
The housing, handle, rails, nose, vents, lens, or accessory mount is cracked or loose.
The accessory slips from the fastener, damages it, breaks it, or drives it beyond the intended seat.
The quick-release collar binds, will not move fully forward, or stays forward after release.
The tool or pack becomes unusually hot, or operation stops only after heat builds.
ट्रिगर वापस आता है और motor रुक जाता है, लेकिन LED लगभग 20 सेकंड से बहुत अधिक समय तक चालू रहता है।
The release button moves poorly or the pack remains trapped on the tool rails.
Tombol maju/mundur tidak masuk, kunci tengah gagal, atau alat berjalan ke arah yang salah.
The motor can be heard, but the front output remains still in both directions with the bit removed.
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
टूल पूरी तरह से मृत है - कोई LED या MOTOR नहीं
Pemicu menyalakan area kerja, tetapi motor tetap diam dan landasan tidak bergerak.
Pemicu macet, gagal kembali, atau motor tetap menyala setelah dilepaskan.
Bright repeated arcing or sharp crackling is visible at the rear vents while the tool runs.

Failure Modes

part