Search repair guides

Find repair guides, manuals, symptoms, and error codes across the knowledge base.

Manuals

Symptoms

A seated battery shows no charge response, or charge never reaches a usable full state.
चार्जर हरा LED फ्लैश नहीं करता, कभी स्थिर नहीं होता, या battery डिस्चार्ज रहता है।
Pemicu macet, gagal kembali, atau motor tetap menyala setelah dilepaskan.
TRIGGER STICKS, WILL NOT RETURN, OR MOTOR KEEPS RUNNING
BATTERY WILL NOT CHARGE
Pakiet nie ładuje się lub lampka ładowarki pozostaje wyłączona lub pokazuje nienormalny czerwony wzór.
Încărcătorul nu începe sau nu finalizează încărcarea, sau lumina verde nu funcționează normal.
The trigger binds or does not spring fully OFF, or the motor keeps running after the trigger is released.
Battery or charger feels warm
THE BATTERY OR CHARGER WILL NOT BEGIN OR COMPLETE A CHARGE
A compatible V20 battery starts onto the tool rails but binds before reaching the normal seated and latched position.
A straight bit or the empty chuck shows repeatable side-to-side runout at low no-load speed after the bit has been centered and tightened correctly.
battery भौतिक रूप से लैच रहता है, लेकिन motor, एलईडी, या दोनों कट जाते हैं और टूल या battery को सामान्य कार्यशील स्थिति में हिलाने पर वापस आते हैं।
motor चलने की आवाज़ आती है, लेकिन चक स्थिर रहता है, स्वतंत्र रूप से रुकता है, या सामान्य ड्राइव ट्रांसमिट किए बिना फ्री-स्पिन करता है।
The chuck jaws open and close normally, but a straight compatible bit rotates or pulls out during moderate drilling or driving.
The chuck still rotates, but a new mechanical grind, knock, scrape, tight spot, or severe vibration remains with the bit removed and is not ordinary motor or brake sound.
The collar moves and holds a low numbered setting, but the clutch does not ratchet before a test fastener is overdriven in suitable scrap material.
The collar moves normally, but the clutch ratchets before a suitable fastener reaches normal depth at appropriate settings, or it audibly slips when drill mode is correctly selected.
The direction selector is centered, but the trigger still depresses enough to start the motor or the center position cannot reliably prevent activation.
The drill sounds and rotates normally with no load, does not stall, overheat, slip, or vibrate abnormally, yet a corrected drilling or fastening task progresses much more slowly than expected.

Failure Modes

part