Search repair guides

Find repair guides, manuals, symptoms, and error codes across the knowledge base.

Models

BDCI20C

Symptoms

लॉक किए गए 0-डिग्री बेवल पर, एक सही ब्लेड पैर के लिए स्क्वायर नहीं है।
सॉ कट पूरा करती है, लेकिन 0-डिग्री कट चौकोर नहीं है, बेवल पैमाना से मेल नहीं खाता, या केर्फ इच्छित कोण से भटकता है।
शून्य-डिग्री कट सामग्री के माध्यम से स्क्वायर नहीं है
360-डिग्री धूल पोर्ट जाम या ढीला है, या एक संगत नली/कपलर जुड़ा नहीं रहता।
Spoušť se plně nevrací ven, nebo motor/kotouč běží i po uvolnění spouště.
The external structure is visibly cracked, loose, crushed, melted, or missing material even if the saw still runs.
A correct-looking bit will not enter fully or can be pulled out after the collar is released.
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
NO WORKLIGHT OR MOTOR RESPONSE
The accessory catches or stops in the material and the tool reacts sharply in the hand.
The bit passed initial insertion, but backs out, falls free, or loses drive while the chuck body stays secure.
The bit rotates, but no impact pulses begin when a correct fastener provides normal resistance.
The collar pulls, but the bit will not come out, or a short/broken piece is recessed in the chuck.
The direction button jams, will not hold center lock, or the tool runs in only one direction.
The motor can be heard, but the front output remains still in both directions with the bit removed.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
The trigger binds or does not spring fully OFF, or the motor keeps running after the trigger is released.
The trigger lights the work area, but the motor stays silent and the quick-release chuck does not turn.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.

Failure Modes

part