Symptoms
Browse documented symptoms and jump into matching repair guides from search results.
A straight bit or socket visibly orbits, shakes, or runs off-center during a brief no-load test.
0 related manuals
Find guides →
Gauge LEDs jump or disagree sharply with charge state and runtime.
0 related manuals
Find guides →
With no fastener load, the bare or correctly fitted output sounds harsh, binds, knocks, or shakes abnormally.
0 related manuals
Find guides →
The guide bar cannot be withdrawn from the kerf, the chain is trapped, or the workpiece closes on the saw.
0 related manuals
Find guides →
The chuck opens and closes, but the bit slips, pulls out, or ejects during normal work.
0 related manuals
Find guides →
The pack is swollen, leaking, hissing, smoking, burning, crushed, wet, or opened.
0 related manuals
Find guides →
The tool, pack, or charger becomes unusually hot, or protection repeatedly stops operation.
0 related manuals
Find guides →
A hand-tightened bit slips, visibly wobbles, or its tip runs off center when the drill turns.
0 related manuals
Find guides →
The drill or battery becomes rapidly or severely hot, or little cooling air can move through the tool vents.
0 related manuals
Find guides →
Drill symbol selected
0 related manuals
Find guides →
The quick-release collar binds, will not move fully forward, or stays forward after release.
0 related manuals
Find guides →
Smoke, liquid, cord, or pack damage
0 related manuals
Find guides →
The forward/reverse button will not seat, center lock-off fails, or the tool runs the wrong way.
0 related manuals
Find guides →
ה-battery נשאר נעול פיזית, אך motor, LED או שניהם נכבים וחוזרים כאשר הכלי או battery זזים בכיוון עבודה רגיל.
0 related manuals
Find guides →
BATTERY WILL NOT SEAT, LATCH, OR RELEASE
0 related manuals
Find guides →
The trigger does not spring fully outward, or the motor/blade keeps running after the trigger is released.
0 related manuals
Find guides →
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
0 related manuals
Find guides →
After chain or bar work, the cover will not sit flush, the bar will not align, or the locking knob cannot begin correctly.
0 related manuals
Find guides →
With the battery removed from every tool and charger, the charge-status button cannot be pressed normally, remains depressed or has broken away.
0 related manuals
Find guides →
A safe-looking battery does not enter a normal charge cycle or never reaches the exact charger's defined full indication after correct seating.
0 related manuals
Find guides →