Search repair guides

Find repair guides, manuals, symptoms, and error codes across the knowledge base.

Manuals

Symptoms

The motor can be heard, but the front output remains still in both directions with the bit removed.
O carregador balança, desliza, levanta do screws ou se afasta durante a inserção ou remoção do battery mesmo que ambas as ranhuras traseiras e a carcaça estejam visivelmente intactas.
With the battery removed, the clutch collar is physically stuck, cracked, excessively loose, or unable to align a numbered setting or drill mode with the index mark.
Motor sound is present, but the anvil and installed bit remain stationary.
The cap will not close, the primer is split or stuck, or the oil-level indicator is cracked, clouded, or leaking.
The cool dry pack has a visibly cracked, missing, loose or distorted rail, release button, latch feature or molded support, whether or not insertion has been attempted.
墊轉動時出現異常驅動接觸聲
The chuck jaws open and close normally, but a straight compatible bit rotates or pulls out during moderate drilling or driving.
A compatible V20 battery starts onto the tool rails but binds before reaching the normal seated and latched position.
A straight bit or the empty chuck shows repeatable side-to-side runout at low no-load speed after the bit has been centered and tightened correctly.
The chuck still rotates, but a new mechanical grind, knock, scrape, tight spot, or severe vibration remains with the bit removed and is not ordinary motor or brake sound.
The collar moves and holds a low numbered setting, but the clutch does not ratchet before a test fastener is overdriven in suitable scrap material.
The collar moves normally, but the clutch ratchets before a suitable fastener reaches normal depth at appropriate settings, or it audibly slips when drill mode is correctly selected.
The direction selector is centered, but the trigger still depresses enough to start the motor or the center position cannot reliably prevent activation.
The drill sounds and rotates normally with no load, does not stall, overheat, slip, or vibrate abnormally, yet a corrected drilling or fastening task progresses much more slowly than expected.
With the battery removed, the keyless chuck sleeve or jaws remain seized, or a clamped bit cannot be released by normal hand rotation.
ה-battery נשאר נעול פיזית, אך motor, LED או שניהם נכבים וחוזרים כאשר הכלי או battery זזים בכיוון עבודה רגיל.
המקדח/מקדח לא יתחיל עם BATTERY מאומת
כאשר battery מוסר והמצמד ריק, סיבוב השרוול מסובב את הציר ו-motor בחופשיות במקום לספק נעילה מספקת להדק או לשחרר את המצמד ביד.
מתג הכיוון זז ומחזיק נקודות עצירה רגילות, אך הצ'אק לא מסתובב בכיוון אחד או מסתובב בכיוון ההפוך לחץ הנבחר.

Failure Modes

part