Search repair guides
Find repair guides, manuals, symptoms, and error codes across the knowledge base.
Efter att avtryckaren släppts fortsätter bladet att slå märkbart längre än normalt.
After trigger release, the bit or square drive coasts noticeably longer than normal before stopping.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
The motor can be heard, but the front output remains still in both directions with the bit removed.
The trigger binds or does not spring fully OFF, or the motor keeps running after the trigger is released.
After a normal full charge, the battery loses a large amount of indicated charge or usable low-load runtime while stored by itself in a cool, dry place.
The trigger binds, the drill continues after release, or speed does not follow trigger pressure safely.
battery nie wsuwa się całkowicie do uchwytu, nie pozostaje zatrzymany lub nie zwalnia normalnie.
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
The trigger lights the work area, but the motor stays silent and the quick-release chuck does not turn.
Trigger binds, fails to return, changes speed erratically, or does not stop the drive.
The battery will not slide in, click into place, release, or remain secure in the handle.
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
The direction lever will not reach forward, reverse, or center lock, or the selected position does not hold.
The chuck jaws bind, will not release a bit, close unevenly, or cannot grip a straight round shank.
The forward/reverse button sticks, commands the wrong rotation, or center does not lock the trigger.
The drive operates normally, but the work light stays dark, flickers, or cuts in and out with trigger use.
הbattery לא מחליק במלואו לידית, לא ננעל, לא נשאר במקומו או לא משתחרר כראוי.
360度除尘口卡住或松动，或兼容的软管/接头无法保持连接。
FM-13: Fm-13 הבלם החשמלי לא עוצר את הלהב מיד
FM-13: The shaft lock is engaged, but the blade stud cannot be
FM-16: FM-16 BIT WILL NOT RELEASE, OR A SHORT OR BROKEN BIT IS TRAPPED
FM-06: HOT/COLD DELAY REMAINS AFTER THE PACK RETURNS TO ROOM TEMPERATURE
FM-05: FM-05 SPEED WILL NOT VARY, SURGES, OR CUTS ERRATICALLY
FM-15: FM-15 BATTERY LOSES CHARGE RAPIDLY WHILE STORED DISCONNECTED
fm-3-2: CHARGE-STATUS INDICATOR GIVES NO RESPONSE AFTER A CONFIRMED FULL CHARGE
FM-03: FM-03 TRIGGER STICKS OR THE MOTOR CONTINUES AFTER RELEASE
FM-18: FM-18 A KNOWN-STRAIGHT BIT SHOWS VISIBLE WOBBLE OR RUNOUT
fm-2-1-4: FM-22 BIT BINDS, TOOL STALLS, TWISTS, OR STOPS IN THE WORK
FM-08: FM-08 הלהב המותקן לא משתחרר
FM-17: FM-17 THE BIT SLIPS OR PULLS OUT UNDER LOAD
FM-27: FM-27 הכלי או הסוללה מתחממים יתר על המידה, או כיבוי חום חוזר
fm-1-1: 锁定的 BATTERY 无法从接收器释放
FM-05: אם המסור נשאר מת עם כוח מוכח ובקרות חופשיות, השאר את המארז סגור והפנה לשירות.
FM-02: המארז לא יושב, ננעל או משתחרר
FM-03: המסור מתחיל ואז נכבה כאשר ההדק מוחזק
FM-06: FM-06 בקרת כיוון לא נבחרת
FM-11: FM-11 מהירות או מומנט נמוכים עם הגדרה נכונה
FM-05: FM-05 המפעיל נתקע או בקרת המהירות לא בטוחה