Search repair guides
Find repair guides, manuals, symptoms, and error codes across the knowledge base.
360度除尘口卡住或松动，或兼容的软管/接头无法保持连接。
No-load operation is smooth, but the saw bounces, chatters, or vibrates as soon as cutting begins.
The blade pinches or stalls in the kerf, or the saw reacts backward during a cut.
The blade turns steadily, but wood cuts slowly, burns, or needs heavy feed pressure.
The external structure is visibly cracked, loose, crushed, melted, or missing material even if the saw still runs.
The saw or pack smokes, leaks, sparks, melts, smells burned, swells, vents, or hisses.
锁定0度斜切时，声音正常的刀片与底座不垂直。
A suitable bag or vacuum collects little dust while the port remains secure and aimed.
motor同軸轉動，但鋸片喺墊圈上停滯或滑動，喺正常支撐切割時。
Spoušť se plně nevrací ven, nebo motor/kotouč běží i po uvolnění spouště.
With the blade clear of material, the saw sounds slow, hunts, or repeatedly rises and falls in speed.
底座可以設定角度，但喺斜切桿鎖定後會移動或切割時漂移。
裝咗正確嘅 battery，但按鎖定按鈕時同扳機冇產生任何 motor 反應。
FM-33: FM-33 DUST PORT WILL NOT SWIVEL, HOLD POSITION, OR RETAIN THE HOSE
FM-03: FM-03 BATTERY WILL NOT SLIDE IN, SEAT, OR LATCH
FM-13: The shaft lock is engaged, but the blade stud cannot be
FM-14: FM-14 AKSELSPÆRRE VIL IKKE ENGAGERE ELLER HOLDE
FM-23: The lower guard resists the lift lever or cannot move fully
FM-24: FM-24 LOWER GUARD WILL NOT CLOSE PROMPTLY
FM-27: The selected depth will not remain fixed after the depth
fm-p17-b-2db8b3a0: A compatible battery cannot travel fully into the housing or will
fm-p17-b-80df6c98: Support the battery, press the release, and slide it forward only to the secondary
fm-p21-b-2e87769a: The blade is damaged, wrong for wood, or fails the required
fm-p22-b-26b8fdae: The shaft lock is engaged, but the blade stud cannot be turned
fm-p29-b-beec475a: Valt djup förblir inte fast efter att djupspaken är
FM-01: FM-01 TOOL IS COMPLETELY DEAD - NO MOTOR RESPONSE
FM-04: The battery is latched in the saw and does not come
FM-06: FM-06 LOCK-OFF DOES NOT BLOCK THE TRIGGER OR RETURN TO REST
FM-07: FM-07 TRIGGER STICKS OR THE MOTOR CONTINUES AFTER RELEASE
FM-08: FM-08 NO-LOAD SPEED IS WEAK, UNEVEN, OR SURGES
FM-17: FM-17 BLADE SLIPS UNDER ORDINARY CUTTING WITH THE STUD PROPERLY SET
FM-29: FM-29 斜切設定滑動或無法保持所選角度
FM-30: FM-30 鋸喺斜切設定為零度時切割不方正