La base está doblada, agrietada, suelta o se tambalea sobre una superficie plana de trabajo

La placa base no se asienta plana, se dobla o agrieta visiblemente, se desplaza respecto al cuerpo de la sierra o se tambalea sobre una superficie plana verificada.

• Drop, impact, or side loading bent the shoe
• Pivot, depth guide, or fastening point is loose or damaged
• Sawdust or debris is trapped under the shoe
• Bevel or depth hardware is not locked, imitating structural looseness

1. The repaired shoe sits flat without rocking, locks securely to the saw, and supports a square straight controlled scrap cut.

1. Remove the battery and place the clean shoe on a verified flat surface without the blade touching anything.
2. Clean the shoe and inspect the plate, edges, pivot, depth guide, bevel joint, and visible fasteners for bend, crack, gap, or movement.
3. Lock the depth and bevel levers and recheck rocking, flatness, and blade-to-shoe relationship with a straightedge and square.
4. - If the shoe remains bent, cracked, loose, or unstable, do not bend it back or cut - use authorized shoe and pivot replacement/alignment service.

Esta es una vista previa de la guía de solución de problemas incluida en el manual de reparación completo.

• FM-25: Fm Dcs578 25

• root cause analysis
• tools needed
• step-by-step repair procedure
• diagrams
• exploded views
• post-repair checks

Las páginas públicas muestran solo una vista previa. Compra el manual completo para descargar los pasos de reparación, diagramas y procedimientos de verificación completos.