البحث في أدلة الإصلاح

اعثر على أدلة الإصلاح والأدلة والأعراض ورموز الأخطاء في قاعدة المعرفة.

الأدلة

الأعراض

The motor can be heard, but the front output remains still in both directions with the bit removed.
With the battery removed, the clutch collar is physically stuck, cracked, excessively loose, or unable to align a numbered setting or drill mode with the index mark.
Motor sound is present, but the anvil and installed bit remain stationary.
The cap will not close, the primer is split or stuck, or the oil-level indicator is cracked, clouded, or leaking.
The cool dry pack has a visibly cracked, missing, loose or distorted rail, release button, latch feature or molded support, whether or not insertion has been attempted.
墊轉動時出現異常驅動接觸聲
الشاحن يتأرجح، ينزلق، يرفع عن screws، أو يُسحب أثناء إدخال أو إزالة battery رغم أن فتحات المفتاح الخلفية والغلاف مرئية سليمة.
A straight bit or the empty chuck shows repeatable side-to-side runout at low no-load speed after the bit has been centered and tightened correctly.
battery V20 بدرجة حرارة الغرفة مثبت بالكامل في شاحن معتمد، لكن الشحن الطبيعي لا يبدأ أو الحزمة لا تصل إلى مؤشر الشحن المكتمل.
battery متوافق يبدأ على قضبان الأداة لكنه يعلق قبل الوصول إلى الوضع الطبيعي المثبت والمقفل.
battery يبقى مقفلًا ماديًا، لكن motor، LED، أو كلاهما ينقطع ويعود عند تحريك الأداة أو battery خلال الوضعية العادية للعمل.
The chuck jaws open and close normally, but a straight compatible bit rotates or pulls out during moderate drilling or driving.
The chuck still rotates, but a new mechanical grind, knock, scrape, tight spot, or severe vibration remains with the bit removed and is not ordinary motor or brake sound.
The collar moves and holds a low numbered setting, but the clutch does not ratchet before a test fastener is overdriven in suitable scrap material.
The collar moves normally, but the clutch ratchets before a suitable fastener reaches normal depth at appropriate settings, or it audibly slips when drill mode is correctly selected.
The direction selector is centered, but the trigger still depresses enough to start the motor or the center position cannot reliably prevent activation.
The drill sounds and rotates normally with no load, does not stall, overheat, slip, or vibrate abnormally, yet a corrected drilling or fastening task progresses much more slowly than expected.
THE DRILL/DRIVER WILL NOT START WITH A VERIFIED BATTERY
With the battery removed, the keyless chuck sleeve or jaws remain seized, or a clamped bit cannot be released by normal hand rotation.
محدد الاتجاه يتحرك ويثبت نقاط التثبيت الطبيعية، لكن الحامل لا يعمل في اتجاه واحد أو يدور عكس السهم المختار.

أوضاع الأعطال

part